IB_KH3462_E3341_LB3 04.03.2008 15:47 Uhr
Seite 4
•The assembled meat grinder t is connected to the motor block r by a bayonet connector:
-Insert the meat grinder casing t into the motor
block r, such that the arrow on the feeding
shaft lies against the symbol 
on the motor block r. The locking button presses itself in (Fig. ).
-Lightly press the meat grinder casing t in and at the same time turn the feeding shaft on the meat grinder casing t into the middle position
(Fig. ), so that the arrow on the feeding shaft
lies against the symbol 
. When the meat grinder casing t engages, the locking button springs out.
-Finally place the feed tray e on top of the feeding funnel.
-To dismantle it, press the locking button and
turn the feeding funnel to the right (Fig. ) 
.
You can now pull the meat grinder casing t out.
b) Assembling the sausage attachment
Unfold the
•Remove the meat grinder casing t as described under a).
•Disassemble any attachments that might be fitted and clean the meat grinder casing t.
Note:
The cross blade i with the spring u is not requi- red for the sausage attachment s! If need be, re- move them both from the meat grinder casing t.
•Coat all metal parts with cooking oil.
•Take the sausage disc d from the small com- partment on the top of the appliance (Fig. ).
•Position the sausage disc d so that the indenta- tions in the sausage disc d lie on the fixing points in the meat grinder casing t.
•Then place the sausage attachment s before the sausage disc d.
•Screw the ring clamp a on
•Assemble the meat grinder casing t as described under a).
c) Assembling the kubbe attachment
Unfold the
•Disassemble the meat grinder casing t as de- scribed under a).
•Disassemble any attachments that might be fitted and clean the meat grinder casing t.
Note:
The cross blade i with the spring u is not requi- red for the Kubbe attachment f! If need be, remo- ve them both from the meat grinder casing t.
•Coat all metal parts with cooking oil.
•Insert both plastic parts of the Kubbe attachment f so that the indentations on the Kubbe attach- ment f lie on the fixing points in the meat grin- der casing t.
•When everything has been correctly assembled, screw the ring clamp a on until it is handtight.
•Assemble the meat grinder casing t as described under a).
d) Assembling the biscuit pastry attachments
Unfold the
•Remove the meat grinder casing t as described under a).
•Disassemble any attachments that might be fitted and clean the meat grinder casing t.
Note:
The cross blade i with the spring u is not requi- red for the biscuit attachment q! If need be, remo- ve them both from the meat grinder casing t.
•Coat all metal parts with cooking oil.
•Remove the pattern strips q from the front of the biscuit attachment q.
- 4 -