KitchenAid W10526089A Make Gas Connection, Typical flexible connection, Complete Connection

Page 13

Make Gas Connection

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Typical flexible connection

1.Apply pipe-joint compound made for use with LP gas to the smaller thread ends of the flexible connector adapters (see B and G in the following illustration).

2.Attach one adapter to the gas pressure regulator and the other adapter to the gas shutoff valve. Tighten both adapters.

3.Use a ¹⁵⁄₁₆" combination wrench and channel lock pliers to attach the flexible connector to the adapters. Check that connector is not kinked.

A B C

D

E

 

H G

F

A. Gas pressure regulator

E. Manual gas shutoff valve

B. Use pipe-joint compound.

F. ½" or ¾" gas pipe

 

C. Adapter (must have ½" male

G. Use pipe-joint compound.

pipe thread)

H. Adapter

 

D. Flexible connector

 

 

Typical rigid pipe connection

A combination of pipe fittings must be used to connect the range to the existing gas line. Your connections may be different, according to the supply line type, size and location.

1.Apply pipe-joint compound made for use with LP gas to all pipe thread connections.

2.Using a pipe wrench to tighten, connect the gas supply to the range.

 

B

 

 

C

 

 

D

 

A

 

F

 

E

 

J

 

 

 

I

H

 

 

G

A. Gas pressure regulator

F. Manual gas shutoff valve

B. 90° elbow (must have

G. ½" or ¾" gas pipe

½" male pipe thread)

H. Nipple

 

C. Nipple

I. Union

 

D. Union

J. 90° elbow

E. Black iron pipe

 

 

Complete Connection

1.Locate gas pressure regulator at rear of storage or warming drawer compartment.

NOTE: On models with a warming drawer, an access cover must be removed from the gas pressure regulator.

A

A. Gas pressure regulator

IMPORTANT: Do not remove the gas pressure regulator.

2.Check that the gas pressure regulator shutoff valve is in the “ON” position. The valve is on when the lever is parallel to the floor.

A

A. Gas pressure regulator shutoff valve

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents W10526089A Table DES Matières Range SafetyWhat to do if YOU Smell GAS Tools and Parts Installation RequirementsParts needed Tools neededMobile home installations require Mobile Home Additional Installation RequirementsLocation Requirements Slide-in Range Product Dimensions Freestanding RangeFreestanding Ranges Installation ClearancesSlide-In Ranges Gas Supply Requirements Electrical RequirementsType of Gas Gas Supply LineCountertop Preparation Gas Supply Pressure TestingBurner Input Requirements Gas Pressure RegulatorUnpack Range Installation InstructionsMeasure for Proper Height Slide-In RangesInstall Anti-Tip Bracket Adjust Leveling LegsFloor Mounting Wall MountingRemove Warming or Storage Drawer Verify Anti-Tip Bracket Is Installed EngagedLevel Range To Remove Warming DrawerTypical flexible connection Make Gas ConnectionTypical rigid pipe connection Complete ConnectionElectronic Ignition System Initial lighting and gas flame adjustmentsCheck Operation of Cooktop Burners Standard Surface Burners TripleTier Flame BurnerAdjust Oven Bake Flame if needed Adjust Flame Height Check Operation of Oven Bake BurnerTo adjust standard burners If the low flame needs to be adjustedReplace Oven Racks and Warming or Storage Drawer Complete InstallationLP Gas Conversion GAS ConversionsTo Convert Gas Pressure Regulator Turn manual shutoff valve to the closed positionTo Convert TripleTier Flame Burners on some models To Convert Standard Surface BurnersGas pressure regulator Remove plastic cover from gas pressure regulator capTo Convert Oven Bake Burner To Convert Oven Broil BurnerPlate External gas orifice spud Internal gas orifice spud Locking screw Orifice hoodNatural Gas Conversion Stamped number To Convert TripleTier Flame Burner on some modelsTo Convert Oven Broil Burner Votre sécurité et celle des autres est très importante Sécurité DE LA CuisinièrePied de La cuisinière Exigences demplacement Exigences D’INSTALLATIONOutillage et pièces 64 cm Dimensions du produit Cuisinière autoportanteCuisinière encastrable 30⁹⁄₁₆ 77,6 cm 30 76,2 cm ³⁄₄ 14,6 cm B 76,2 cmCuisinières autoportantes Dégagements de séparation à respecterCuisinières encastrables Spécifications de l’alimentation en gaz Spécifications électriquesType de gaz Gaz naturelDétendeur Canalisation dalimentation en gazDébit thermique des brûleurs Tests de pressurisation de la canalisation de gazPréparation du plan de travail Instructions DinstallationDéballage de la cuisinière Mesures pour une hauteur appropriéeRéglage des pieds de nivellement Installation de la bride antibasculementRetrait du tiroir-réchaud Retrait du tiroir-réchaud ou du tiroir De remisageRetrait du tiroir de remisage Montage au plancherSur les modèles avec tiroir de remisage Réglage de laplomb de la cuisinièreSur les modèles avec tiroir-réchaud Sur les cuisinières équipées de tiroirs de remisageRaccordement typique par raccord flexible Raccordement à la canalisation de gazRaccordement typique à une canalisation rigide Compléter le raccordementCuisinière encastrable Système dallumage électroniqueAllumage initial et réglages des flammes Brûleur TripleTierRéglage de la taille des flammes Si le brûleur ne sallume pas correctementContrôle du fonctionnement du brûleur de cuisson au four Réglage des brûleurs standardRéinstallation du tiroir de remisage Réinstallation du tiroir-réchaudContrôle du fonctionnement du brûleur du gril Sil est nécessaire de régler la taille des flammesSi vous avez besoin dassistance ou de service Achever l’installationSi la cuisinière ne fonctionne pas, contrôler ce qui suit Conversion pour lalimentation au propane Conversions Pour Changement DE GAZConversion du détendeur Important Ne pas enlever le détendeurDétendeur Conversion des brûleurs standard de la table de cuissonConversion du brûleur du gril Conversion du brûleur de cuisson au fourPlaque Gicleur externe Gicleur interne Injecteur femelle BrocheConversion des brûleurs standard de surface Conversion pour lalimentation au gaz naturelChiffre gravé Ôter les grilles du four

W10526089A specifications

The KitchenAid W10526089A is a highly efficient and versatile appliance that serves as a replacement water filter, designed specifically for select KitchenAid refrigerators. This model ensures that you and your family can enjoy clean, fresh-tasting water and ice. One of its main features is the ability to reduce contaminants commonly found in tap water, including chlorine, lead, and sediment, ensuring a healthier drinking experience.

One of the standout technologies in the W10526089A is its advanced filtration system, which includes activated carbon. This technology works effectively to absorb impurities that can affect the taste and purity of water. Not only does it enhance flavor, but it also helps in removing odors, delivering crisp and refreshing hydration. The filter is designed to provide up to six months of use, depending on water quality and consumption, which ensures that you get great performance without frequent replacements.

Installation of the W10526089A is straightforward, making it easy for homeowners to replace their existing filter without needing professional assistance. It features a simple twist-and-lock design that allows for quick and hassle-free changes. This ease of use is a significant benefit, particularly for busy families who rely on continual access to filtered water.

In terms of characteristics, the W10526089A is designed to fit within specific KitchenAid refrigerator models, ensuring seamless compatibility. Its compact size allows it to fit discreetly behind the refrigerator’s interior, maintaining aesthetic appeal while ensuring functionality. Additionally, the filter carries the NSF International certification, which verifies that it meets strict public health standards for water filtration safety and performance.

The W10526089A also comes with a clear indicator that alerts users when it’s time to replace the filter, promoting better maintenance and ensuring your water remains pure at all times. This intelligent feature minimizes the guesswork involved with water filter replacement, leading to improved health and convenience.

Overall, the KitchenAid W10526089A water filter is a reliable investment for anyone looking to improve their home’s drinking water quality, offering advanced filtration technologies, user-friendly design, and a commitment to safety and performance.
Top Page Image Contents