KitchenAid W10526089A Replace Oven Racks and Warming or Storage Drawer, Complete Installation

Page 16

Check Operation of Oven Broil Burner

1.Close the oven door.

2.Press the BROIL pad. “FULL BROIL” and broil temperature will appear in the temperature display.

3.Press the START pad. “ON” indicator will light.

The oven burner should light within 8 seconds, under certain conditions it may take the burner up to 50 to 60 seconds to light. On some models, an electric halo element also turns on.

A

B

A. Gas burner

B. Electric halo element

NOTE: Oven door must be shut for broil burner to operate.

Adjust Oven Broil Burner Flame (if needed)

Look through oven window to check broil burner for proper flame. This flame should have a ½" (1.3 cm) long inner cone of bluish-green, with an outer mantle of dark blue, and should be clean and soft in character. No yellow tips, blowing or lifting of flame should occur.

A

B

A. Locking screw

B. Air shutter

If flame needs to be adjusted:

1.Use a flat-blade screwdriver to loosen the locking screw on the air shutter located at the rear of the broil burner.

2.Adjust the air shutter as need.

3.Tighten lock screw.

Replace Oven Racks and Warming or

Storage Drawer

Replace oven racks in oven cavity. Replace warming drawer or storage drawer.

To Replace Warming Drawer:

1.Align the drawer glides with the receiving guides.

2.Push drawer in all the way.

Gently open and close the drawer to ensure it is seated properly on the slides.

To Replace Storage Drawer:

1.Fit the ends of the drawer rails into the guides in the cavity.

2.Slide the drawer closed.

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all of your tools.

3.Dispose of/recycle all packaging materials.

4.Check that the range is level. See the “Level Range” section.

5.Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by shipping material. Dry thoroughly with a soft cloth. For more information, see the “Range Care” section of the Use and Care Guide or User Instructions.

6.Read the Use and Care Guide or User Instructions.

7.Turn on surface burners and oven. See the Use and Care Guide or User Instructions for specific instruction on range operation.

If range does not operate, check the following:

■Household fuse is intact and tight, or circuit breaker has not tripped.

■Range is plugged into a grounded 3 prong outlet.

■Electrical supply is connected.

■See “Troubleshooting” in the Use and Care Guide or User Instructions.

8.When the range has been on for 5 minutes, check for heat. If the range is cold, turn off the range and check that the gas supply line shutoff valve is open.

■If the gas supply line shutoff valve is closed, open it, then repeat the 5-minute test as outlined above.

■If the gas supply line shutoff valve is open, press the CANCEL button on the oven control panel and contact a qualified technician.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use and Care Guide or the cover of the User Instructions, or contact the dealer from whom you purchased your range.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents W10526089A Range Safety Table DES MatièresWhat to do if YOU Smell GAS Installation Requirements Tools and PartsParts needed Tools neededMobile home installations require Mobile Home Additional Installation RequirementsLocation Requirements Product Dimensions Freestanding Range Slide-in RangeFreestanding Ranges Installation ClearancesSlide-In Ranges Electrical Requirements Gas Supply RequirementsType of Gas Gas Supply LineGas Supply Pressure Testing Countertop PreparationBurner Input Requirements Gas Pressure RegulatorInstallation Instructions Unpack RangeMeasure for Proper Height Slide-In RangesAdjust Leveling Legs Install Anti-Tip BracketFloor Mounting Wall MountingVerify Anti-Tip Bracket Is Installed Engaged Remove Warming or Storage DrawerLevel Range To Remove Warming DrawerMake Gas Connection Typical flexible connectionTypical rigid pipe connection Complete ConnectionInitial lighting and gas flame adjustments Electronic Ignition SystemCheck Operation of Cooktop Burners Standard Surface Burners TripleTier Flame BurnerAdjust Flame Height Check Operation of Oven Bake Burner Adjust Oven Bake Flame if neededTo adjust standard burners If the low flame needs to be adjustedComplete Installation Replace Oven Racks and Warming or Storage DrawerGAS Conversions LP Gas ConversionTo Convert Gas Pressure Regulator Turn manual shutoff valve to the closed positionTo Convert Standard Surface Burners To Convert TripleTier Flame Burners on some modelsGas pressure regulator Remove plastic cover from gas pressure regulator capTo Convert Oven Broil Burner To Convert Oven Bake BurnerPlate External gas orifice spud Internal gas orifice spud Locking screw Orifice hoodNatural Gas Conversion To Convert TripleTier Flame Burner on some models Stamped numberTo Convert Oven Broil Burner Sécurité DE LA Cuisinière Votre sécurité et celle des autres est très importantePied de La cuisinière Exigences demplacement Exigences D’INSTALLATIONOutillage et pièces Dimensions du produit Cuisinière autoportante 64 cmCuisinière encastrable 30⁹⁄₁₆ 77,6 cm 30 76,2 cm ³⁄₄ 14,6 cm B 76,2 cmCuisinières autoportantes Dégagements de séparation à respecterCuisinières encastrables Spécifications électriques Spécifications de l’alimentation en gazType de gaz Gaz naturelCanalisation dalimentation en gaz DétendeurDébit thermique des brûleurs Tests de pressurisation de la canalisation de gazInstructions Dinstallation Préparation du plan de travailDéballage de la cuisinière Mesures pour une hauteur appropriéeInstallation de la bride antibasculement Réglage des pieds de nivellementRetrait du tiroir-réchaud ou du tiroir De remisage Retrait du tiroir-réchaudRetrait du tiroir de remisage Montage au plancherRéglage de laplomb de la cuisinière Sur les modèles avec tiroir de remisageSur les modèles avec tiroir-réchaud Sur les cuisinières équipées de tiroirs de remisageRaccordement à la canalisation de gaz Raccordement typique par raccord flexibleRaccordement typique à une canalisation rigide Compléter le raccordementSystème dallumage électronique Cuisinière encastrableAllumage initial et réglages des flammes Brûleur TripleTierSi le brûleur ne sallume pas correctement Réglage de la taille des flammesContrôle du fonctionnement du brûleur de cuisson au four Réglage des brûleurs standardRéinstallation du tiroir-réchaud Réinstallation du tiroir de remisageContrôle du fonctionnement du brûleur du gril Sil est nécessaire de régler la taille des flammesSi vous avez besoin dassistance ou de service Achever l’installationSi la cuisinière ne fonctionne pas, contrôler ce qui suit Conversions Pour Changement DE GAZ Conversion pour lalimentation au propaneConversion du détendeur Important Ne pas enlever le détendeurConversion des brûleurs standard de la table de cuisson DétendeurConversion du brûleur de cuisson au four Conversion du brûleur du grilPlaque Gicleur externe Gicleur interne Injecteur femelle BrocheConversion pour lalimentation au gaz naturel Conversion des brûleurs standard de surfaceChiffre gravé Ôter les grilles du four

W10526089A specifications

The KitchenAid W10526089A is a highly efficient and versatile appliance that serves as a replacement water filter, designed specifically for select KitchenAid refrigerators. This model ensures that you and your family can enjoy clean, fresh-tasting water and ice. One of its main features is the ability to reduce contaminants commonly found in tap water, including chlorine, lead, and sediment, ensuring a healthier drinking experience.

One of the standout technologies in the W10526089A is its advanced filtration system, which includes activated carbon. This technology works effectively to absorb impurities that can affect the taste and purity of water. Not only does it enhance flavor, but it also helps in removing odors, delivering crisp and refreshing hydration. The filter is designed to provide up to six months of use, depending on water quality and consumption, which ensures that you get great performance without frequent replacements.

Installation of the W10526089A is straightforward, making it easy for homeowners to replace their existing filter without needing professional assistance. It features a simple twist-and-lock design that allows for quick and hassle-free changes. This ease of use is a significant benefit, particularly for busy families who rely on continual access to filtered water.

In terms of characteristics, the W10526089A is designed to fit within specific KitchenAid refrigerator models, ensuring seamless compatibility. Its compact size allows it to fit discreetly behind the refrigerator’s interior, maintaining aesthetic appeal while ensuring functionality. Additionally, the filter carries the NSF International certification, which verifies that it meets strict public health standards for water filtration safety and performance.

The W10526089A also comes with a clear indicator that alerts users when it’s time to replace the filter, promoting better maintenance and ensuring your water remains pure at all times. This intelligent feature minimizes the guesswork involved with water filter replacement, leading to improved health and convenience.

Overall, the KitchenAid W10526089A water filter is a reliable investment for anyone looking to improve their home’s drinking water quality, offering advanced filtration technologies, user-friendly design, and a commitment to safety and performance.
Top Page Image Contents