KitchenAid W10526089A To Convert Oven Broil Burner, To Convert Oven Bake Burner, Orifice hood Pin

Page 19

IMPORTANT: The TripleTier® Flame burner has 2 gas orifice spuds. Do not forget to change the external gas orifice spud located under the plate.

A

B

C

To Convert Oven Broil Burner

1.Use a ½" combination wrench to turn the orifice hood clockwise (about 2 to 2½ turns) so it is snug onto the pin.

IMPORTANT: Do not overtighten.

NOTE: Turning the orifice hood clockwise will decrease flame size; turning it counterclockwise will increase flame size.

The oven broil burner flame cannot be properly adjusted if this conversion is not made. See “Adjust Oven Broil Burner Flame” in the “Electronic Ignition System” section.

A.Plate

B.External gas orifice spud

C.Internal gas orifice spud

4.Apply masking tape to the end of a 7 mm nut driver to help hold the internal gas orifice spud in the nut driver while changing it. Press nut driver down onto the internal gas orifice spud and remove by turning it counterclockwise and lifting out. Set internal gas orifice spud aside.

5.Use a 7 mm combination wrench to remove the external gas orifice spud. Turn counterclockwise to remove. Set external gas orifice spud aside.

6.Replace each Natural gas orifice spud with the correct LP gas orifice spud. Refer to the following chart for correct LP gas orifice spud placement.

LP Gas Orifice Spud Chart for TripleTier® Flame Burners

Burner Location

Burner Rating

Color

Size

Left front (external

11,800

Btu/h

Brown

1.00 mm

TripleTier® burner)

 

 

 

 

 

 

 

 

 

Left front (internal

2,200

Btu/h

Orange

0.42 mm

TripleTier® burner)

 

 

 

 

 

 

 

 

 

7.Replace burner plate, head and cap.

8.Place Natural gas orifice spuds in plastic parts bag for future use and keep with package containing literature.

To Convert Oven Bake Burner

1.Remove oven racks.

2.Use a ½" combination wrench to turn the orifice hood clockwise (about 2 to 2½ turns) so it is snug onto the pin.

IMPORTANT: Do not overtighten.

NOTE: Turning the orifice hood clockwise will decrease flame size; turning it counterclockwise will increase flame size.

The oven bake burner flame cannot be properly adjusted if this conversion is not made. See “Adjust Oven Bake Flame” in the “Electronic Ignition System” section.

A

B

A. Locking screw

B. Orifice hood

2.Reinstall the warming or storage drawer. See the “Replace Oven Racks and Warming or Storage Drawer” section for instructions.

3.Complete installation. See “Make Gas Connection” and “Electronic Ignition System” sections.

Checking for proper cooktop burner flames and oven burner flames is very important. The small inner cone should have a very distinct blue flame ¼" (0.6 cm) to ½" (1.3 cm) long. The outer cone is not as distinct as the inner cone. LP gas flames have a slightly yellow tip.

IMPORTANT: You may have to adjust the “LO” setting for each cooktop burner.

A

B

A

A

A. Orifice hood

B. Pin

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents W10526089A Table DES Matières Range SafetyWhat to do if YOU Smell GAS Tools needed Installation RequirementsTools and Parts Parts neededMobile home installations require Mobile Home Additional Installation RequirementsLocation Requirements Slide-in Range Product Dimensions Freestanding RangeFreestanding Ranges Installation ClearancesSlide-In Ranges Gas Supply Line Electrical RequirementsGas Supply Requirements Type of GasGas Pressure Regulator Gas Supply Pressure TestingCountertop Preparation Burner Input RequirementsSlide-In Ranges Installation InstructionsUnpack Range Measure for Proper HeightWall Mounting Adjust Leveling LegsInstall Anti-Tip Bracket Floor MountingTo Remove Warming Drawer Verify Anti-Tip Bracket Is Installed EngagedRemove Warming or Storage Drawer Level RangeComplete Connection Make Gas ConnectionTypical flexible connection Typical rigid pipe connectionTripleTier Flame Burner Initial lighting and gas flame adjustmentsElectronic Ignition System Check Operation of Cooktop Burners Standard Surface BurnersIf the low flame needs to be adjusted Adjust Flame Height Check Operation of Oven Bake BurnerAdjust Oven Bake Flame if needed To adjust standard burnersReplace Oven Racks and Warming or Storage Drawer Complete InstallationTurn manual shutoff valve to the closed position GAS ConversionsLP Gas Conversion To Convert Gas Pressure RegulatorRemove plastic cover from gas pressure regulator cap To Convert Standard Surface BurnersTo Convert TripleTier Flame Burners on some models Gas pressure regulatorLocking screw Orifice hood To Convert Oven Broil BurnerTo Convert Oven Bake Burner Plate External gas orifice spud Internal gas orifice spudNatural Gas Conversion Stamped number To Convert TripleTier Flame Burner on some modelsTo Convert Oven Broil Burner Votre sécurité et celle des autres est très importante Sécurité DE LA CuisinièrePied de La cuisinière Exigences demplacement Exigences D’INSTALLATIONOutillage et pièces 30⁹⁄₁₆ 77,6 cm 30 76,2 cm ³⁄₄ 14,6 cm B 76,2 cm Dimensions du produit Cuisinière autoportante64 cm Cuisinière encastrableCuisinières autoportantes Dégagements de séparation à respecterCuisinières encastrables Gaz naturel Spécifications électriquesSpécifications de l’alimentation en gaz Type de gazTests de pressurisation de la canalisation de gaz Canalisation dalimentation en gazDétendeur Débit thermique des brûleursMesures pour une hauteur appropriée Instructions DinstallationPréparation du plan de travail Déballage de la cuisinièreRéglage des pieds de nivellement Installation de la bride antibasculementMontage au plancher Retrait du tiroir-réchaud ou du tiroir De remisageRetrait du tiroir-réchaud Retrait du tiroir de remisageSur les cuisinières équipées de tiroirs de remisage Réglage de laplomb de la cuisinièreSur les modèles avec tiroir de remisage Sur les modèles avec tiroir-réchaudCompléter le raccordement Raccordement à la canalisation de gazRaccordement typique par raccord flexible Raccordement typique à une canalisation rigideBrûleur TripleTier Système dallumage électroniqueCuisinière encastrable Allumage initial et réglages des flammesRéglage des brûleurs standard Si le brûleur ne sallume pas correctementRéglage de la taille des flammes Contrôle du fonctionnement du brûleur de cuisson au fourSil est nécessaire de régler la taille des flammes Réinstallation du tiroir-réchaudRéinstallation du tiroir de remisage Contrôle du fonctionnement du brûleur du grilSi vous avez besoin dassistance ou de service Achever l’installationSi la cuisinière ne fonctionne pas, contrôler ce qui suit Important Ne pas enlever le détendeur Conversions Pour Changement DE GAZConversion pour lalimentation au propane Conversion du détendeurDétendeur Conversion des brûleurs standard de la table de cuissonInjecteur femelle Broche Conversion du brûleur de cuisson au fourConversion du brûleur du gril Plaque Gicleur externe Gicleur interneConversion des brûleurs standard de surface Conversion pour lalimentation au gaz naturelChiffre gravé Ôter les grilles du four

W10526089A specifications

The KitchenAid W10526089A is a highly efficient and versatile appliance that serves as a replacement water filter, designed specifically for select KitchenAid refrigerators. This model ensures that you and your family can enjoy clean, fresh-tasting water and ice. One of its main features is the ability to reduce contaminants commonly found in tap water, including chlorine, lead, and sediment, ensuring a healthier drinking experience.

One of the standout technologies in the W10526089A is its advanced filtration system, which includes activated carbon. This technology works effectively to absorb impurities that can affect the taste and purity of water. Not only does it enhance flavor, but it also helps in removing odors, delivering crisp and refreshing hydration. The filter is designed to provide up to six months of use, depending on water quality and consumption, which ensures that you get great performance without frequent replacements.

Installation of the W10526089A is straightforward, making it easy for homeowners to replace their existing filter without needing professional assistance. It features a simple twist-and-lock design that allows for quick and hassle-free changes. This ease of use is a significant benefit, particularly for busy families who rely on continual access to filtered water.

In terms of characteristics, the W10526089A is designed to fit within specific KitchenAid refrigerator models, ensuring seamless compatibility. Its compact size allows it to fit discreetly behind the refrigerator’s interior, maintaining aesthetic appeal while ensuring functionality. Additionally, the filter carries the NSF International certification, which verifies that it meets strict public health standards for water filtration safety and performance.

The W10526089A also comes with a clear indicator that alerts users when it’s time to replace the filter, promoting better maintenance and ensuring your water remains pure at all times. This intelligent feature minimizes the guesswork involved with water filter replacement, leading to improved health and convenience.

Overall, the KitchenAid W10526089A water filter is a reliable investment for anyone looking to improve their home’s drinking water quality, offering advanced filtration technologies, user-friendly design, and a commitment to safety and performance.
Top Page Image Contents