KitchenAid W10526089A Installation Requirements, Tools and Parts, Parts needed, Tools needed

Page 4

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Install anti-tip bracket to floor or wall per installation instructions.

Slide range back so rear range foot is engaged in the slot of the anti-tip bracket. Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

Anti-Tip

Bracket

Range Foot

To verify the anti-tip bracket is installed and engaged:

Slide range forward.

Look for the anti-tip bracket securely attached to floor or wall.

Slide range back so rear range foot is under anti-tip bracket.

See installation instructions for details.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Parts needed

Check local codes and consult gas supplier. Check existing gas

Tools needed

Tape measure

Flat-blade screwdriver

Phillips screwdriver

Level

Hand or electric drill

Hammer

Wrench or pliers

Pipe wrench

¹⁵⁄₁₆" combination wrench

³⁄₈" nut driver

¹⁄₈" (3.2 mm) drill bit (for wood floors)

Marker or pencil

Masking tape

Pipe-joint compound resistant to LP gas

³⁄₁₆" (4.8 mm) carbide-tipped masonry drill bit (for concrete/ceramic floors)

Noncorrosive leak-detection solution

For LP/Natural Gas

Conversions

½" combination wrench

7 mm combination wrench

7 mm nut driver

Size T20® Torx®† screwdriver

supply and electrical supply. See “Electrical Requirements” and “Gas Supply Requirements” sections.

Rear Filler Strip (optional)

The filler strip may be used to fill a gap between the rear of the slide-in range and the wall in a freestanding range cutout.

A

B

B

C

Parts supplied

Check that all parts are included.

A

B

A. Anti-tip bracket

B. #12 x 1⁵⁄₈" screws (2)

A. Filler strip

B.Countertop

C.Countertop cutout

To order, see the “Assistance or Service” section of the Use and Care Guide. Order Part Number W10113902A (black), W10113903A (white) or W10113904A (biscuit).

Anti-tip bracket must be securely mounted to floor or wall. Thickness of flooring may require longer screws to anchor bracket to floor.

†®TORX and T20 are registered trademarks of Saturn Fasteners, Inc.

4

Image 4
Contents W10526089A Range Safety Table DES MatièresWhat to do if YOU Smell GAS Installation Requirements Tools and PartsParts needed Tools neededMobile home installations require Mobile Home Additional Installation RequirementsLocation Requirements Product Dimensions Freestanding Range Slide-in RangeFreestanding Ranges Installation ClearancesSlide-In Ranges Electrical Requirements Gas Supply RequirementsType of Gas Gas Supply LineGas Supply Pressure Testing Countertop PreparationBurner Input Requirements Gas Pressure RegulatorInstallation Instructions Unpack RangeMeasure for Proper Height Slide-In RangesAdjust Leveling Legs Install Anti-Tip BracketFloor Mounting Wall MountingVerify Anti-Tip Bracket Is Installed Engaged Remove Warming or Storage DrawerLevel Range To Remove Warming DrawerMake Gas Connection Typical flexible connectionTypical rigid pipe connection Complete ConnectionInitial lighting and gas flame adjustments Electronic Ignition SystemCheck Operation of Cooktop Burners Standard Surface Burners TripleTier Flame BurnerAdjust Flame Height Check Operation of Oven Bake Burner Adjust Oven Bake Flame if neededTo adjust standard burners If the low flame needs to be adjustedComplete Installation Replace Oven Racks and Warming or Storage DrawerGAS Conversions LP Gas ConversionTo Convert Gas Pressure Regulator Turn manual shutoff valve to the closed positionTo Convert Standard Surface Burners To Convert TripleTier Flame Burners on some modelsGas pressure regulator Remove plastic cover from gas pressure regulator capTo Convert Oven Broil Burner To Convert Oven Bake BurnerPlate External gas orifice spud Internal gas orifice spud Locking screw Orifice hoodNatural Gas Conversion To Convert TripleTier Flame Burner on some models Stamped numberTo Convert Oven Broil Burner Sécurité DE LA Cuisinière Votre sécurité et celle des autres est très importantePied de La cuisinière Exigences demplacement Exigences D’INSTALLATIONOutillage et pièces Dimensions du produit Cuisinière autoportante 64 cmCuisinière encastrable 30⁹⁄₁₆ 77,6 cm 30 76,2 cm ³⁄₄ 14,6 cm B 76,2 cmCuisinières autoportantes Dégagements de séparation à respecterCuisinières encastrables Spécifications électriques Spécifications de l’alimentation en gazType de gaz Gaz naturelCanalisation dalimentation en gaz DétendeurDébit thermique des brûleurs Tests de pressurisation de la canalisation de gazInstructions Dinstallation Préparation du plan de travailDéballage de la cuisinière Mesures pour une hauteur appropriéeInstallation de la bride antibasculement Réglage des pieds de nivellementRetrait du tiroir-réchaud ou du tiroir De remisage Retrait du tiroir-réchaudRetrait du tiroir de remisage Montage au plancherRéglage de laplomb de la cuisinière Sur les modèles avec tiroir de remisageSur les modèles avec tiroir-réchaud Sur les cuisinières équipées de tiroirs de remisageRaccordement à la canalisation de gaz Raccordement typique par raccord flexibleRaccordement typique à une canalisation rigide Compléter le raccordementSystème dallumage électronique Cuisinière encastrableAllumage initial et réglages des flammes Brûleur TripleTierSi le brûleur ne sallume pas correctement Réglage de la taille des flammesContrôle du fonctionnement du brûleur de cuisson au four Réglage des brûleurs standardRéinstallation du tiroir-réchaud Réinstallation du tiroir de remisageContrôle du fonctionnement du brûleur du gril Sil est nécessaire de régler la taille des flammesSi vous avez besoin dassistance ou de service Achever l’installationSi la cuisinière ne fonctionne pas, contrôler ce qui suit Conversions Pour Changement DE GAZ Conversion pour lalimentation au propaneConversion du détendeur Important Ne pas enlever le détendeurConversion des brûleurs standard de la table de cuisson DétendeurConversion du brûleur de cuisson au four Conversion du brûleur du grilPlaque Gicleur externe Gicleur interne Injecteur femelle BrocheConversion pour lalimentation au gaz naturel Conversion des brûleurs standard de surfaceChiffre gravé Ôter les grilles du four

W10526089A specifications

The KitchenAid W10526089A is a highly efficient and versatile appliance that serves as a replacement water filter, designed specifically for select KitchenAid refrigerators. This model ensures that you and your family can enjoy clean, fresh-tasting water and ice. One of its main features is the ability to reduce contaminants commonly found in tap water, including chlorine, lead, and sediment, ensuring a healthier drinking experience.

One of the standout technologies in the W10526089A is its advanced filtration system, which includes activated carbon. This technology works effectively to absorb impurities that can affect the taste and purity of water. Not only does it enhance flavor, but it also helps in removing odors, delivering crisp and refreshing hydration. The filter is designed to provide up to six months of use, depending on water quality and consumption, which ensures that you get great performance without frequent replacements.

Installation of the W10526089A is straightforward, making it easy for homeowners to replace their existing filter without needing professional assistance. It features a simple twist-and-lock design that allows for quick and hassle-free changes. This ease of use is a significant benefit, particularly for busy families who rely on continual access to filtered water.

In terms of characteristics, the W10526089A is designed to fit within specific KitchenAid refrigerator models, ensuring seamless compatibility. Its compact size allows it to fit discreetly behind the refrigerator’s interior, maintaining aesthetic appeal while ensuring functionality. Additionally, the filter carries the NSF International certification, which verifies that it meets strict public health standards for water filtration safety and performance.

The W10526089A also comes with a clear indicator that alerts users when it’s time to replace the filter, promoting better maintenance and ensuring your water remains pure at all times. This intelligent feature minimizes the guesswork involved with water filter replacement, leading to improved health and convenience.

Overall, the KitchenAid W10526089A water filter is a reliable investment for anyone looking to improve their home’s drinking water quality, offering advanced filtration technologies, user-friendly design, and a commitment to safety and performance.