Frymaster BIELA14 warranty Danger, Notice

Page 3
 DANGER

Manual background DANGER

Improper installation, adjustment, maintenance or service, and unauthorized alterations or modifications can cause property damage, injury, or death. Read the installation, operating, and service instructions thoroughly before installing or servicing this equipment.

Manual background DANGER

The front ledge of this appliance is not a step! Do not stand on the appliance. Serious injury can result from slips or contact with the hot oil.

Manual background DANGER

Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.

Manual background DANGER

The crumb tray in fryers equipped with a filter system must be emptied into a fireproof container at the end of frying operations each day. Some food particles can spontaneously combust if left soaking in certain shortening material.

Manual background WARNING

Do not bang fry baskets or other utensils on the fryer’s joiner strip. The strip is present to seal the joint between the fry vessels. Banging fry baskets on the strip to dislodge shortening will distort the strip, adversely affecting its fit. It is designed for a tight fit and should only be removed for cleaning.

Manual background DANGER

Adequate means must be provided to limit the movement of this appliance without depending on or transmitting stress to the electrical conduit. A restraint kit is provided with the fryer. If the restraint kit is missing contact your local KES.

Manual background DANGER

This fryer has a power cord (three-phase) for each frypot and a single five-wire cord for the entire system. Prior to movement, testing, maintenance and any repair on your Frymaster

fryer; disconnect ALL electrical power cords from the electrical power supply.

Manual background DANGER

Keep all items out of drains. Closing actuators may cause damage or injury.

NOTICE

The instructions in this manual for using a bulk oil system for filling and discarding oil are for an RTI system. These instructions may not be applicable to other bulk oil systems.

Image 3
Contents FOR YOUR SAFETY OPERATOR’S MANUALFRYMASTER BIELA14 SERIES GEN II LOV ELECTRIC FRYERCANADA NOTICENOTICE TO U.S. CUSTOMERS NOTICE TO OWNERS OF UNITS EQUIPPED WITH COMPUTERSDANGER 4.10.2 M3000 Menu Summary TreeAdding New Product Menu Items Product Selection See sectionC.PARTS RETURN A.WARRANTY PROVISIONS - FRYERSB.WARRANTY PROVISIONS - FRYPOTS D.WARRANTY EXCLUSIONS•overtime or holiday charges This warranty also does not cover1.1General 1.2Safety InformationBIELA14 SERIES GEN II LOV ELECTRIC FRYER CHAPTER 1: INTRODUCTIONCE Standard 1.5Installation, Operating, and Service Personnel1.3Computer Information for the M3000 Computers 1.4European Community CE Specific InformationWhat to do if your equipment arrives damaged 1.7Shipping Damage Claim Procedure1.8Service Information NOTICE 2.1General Installation Requirements2.1.2 Electrical Grounding Requirements 2.1.3 Australian Requirements 2.2Power RequirementsDANGER CHAPTER 3: OPERATING INSTRUCTIONS TYPICAL CONFIGURATION BIELA314 SHOWNM3000 COMPUTER 3.1Equipment Setup and Shutdown Procedures3.3.3 Routine Oil Changes 3.3 Low Oil Volume Automatic Refill3.3.2 Install the Oil Reservoir 3.3.1 Prepare the System for Use3.3.4Bulk Oil Systems FR FRIES 4.1M3000 General Information4.2Basic Operation 4.3Cooking with Multi-ProductDisplay 4.4Cooking with Dedicated Display Press and quickly 4.5Changing from Breakfast Setup to Lunch<<<< >>>> <<<<>>>>; an alarm will sound4.6Changing from Lunch Setup to Breakfast 4.7.3 Cook Channel and Selection Buttons 4.7M3000 Button Description and Functions4.7.1 Navigation Buttons 4.7.2 Filter, Temperature and Info Buttons4.10.3 4.8M3000 Menu Summary TreeSee section 4.10.21234 4.9Fryer Setup Mode Programming24hR 1.Escaping out of a menu or sub-menu 4.10 M3000 Common Tasks4.10.1 Escape Menu Items fullselection productPROD COOK ID DISABLE Product selection prompt 4.10.3 Storing Menu Items in Product Buttons4.10.4.1 Disposal for Non-BulkOil Systems 4.10.4.2 Refilling JIB Oil Systems The computer displays DRAINING When finished, the computer displays REMOVE PAN2. Press the u INFO button and scroll to dispose 4. To dispose press the 1 yes button to continueb. maint filter 4.11.1 Accessing the Filter Menu4.11 Filter Menu a. auto filter4.11.2 Drain to Pan yes no 4.11.3 Fill Vat from Drain Pan4.11.4 Fill Vat from Bulk 4.11.5 Pan to Waste 4.12 Programming Level One4.12.1 AIF CLOCK c. DEEP CLEAN MODEe. Fryer setup a.disabled b.enabled4.12.2DEEP CLEAN MODE BOIL-OUT selection displayYes No EMPTY? and Yes NO DANGER 4.12.3 HIGH-LIMITTEST MODE comp 4.13 Programming Level Twob. e-log c. password SETUP4.13.1 PRODUCT COMP MODE a. Prod comp4.13.2 E-LOGMODE 4.13.3 PASSWORD SETUP MODE4.13.4 ALERT TONE MODE 4.13.5 FILTER AFTER 4.13.6 FILTER TIME 4.14 INFO Modea. filter stats FULL VAT CONFIGURATIONSPLIT VAT CONFIGURATION 4.14.1 FILTER STATS MODEa. DAY wed, DATE 03/20/07 – Current day and date 4.14.2 REVIEW USAGE MODEFULL / SPLIT VAT CONFIGURATION 43214.14.3LAST LOAD MODE 4-38 5.Press the 2 button again to quit5.2Preparing the Filter for Use CHAPTER 5: FILTRATION INSTRUCTIONS5.1Introduction The filter pad or paper MUST be replaced daily5.3 Auto Intermittent Filtration AIF 5.3.1 Auto Demand Filtration DRAINING, WASHING and FILLING during the process2. Press the 9 1 yes button to continue 9.Press 9 1 yes to silence alarm and continue prompt for SYSTEM ERROR 5.4.4 Filter Error Flowchart5.4.5 Filter Busy 5.5Manual or End of Day Filtration MAINT FLTRThe filter pad or paper must be replaced daily 2.Press the uINFO button to scroll to maInT fIltEr 9. Press the 9 1 yes button to continue 6.1Cleaning the Fryer DANGER 6.1.2Clean the Built-inFiltration System – Daily6.1.3Clean Behind Fryers – Weekly Fryer Deep Clean Boiling Out the FrypotReplace the O-rings 6.2Annual/Periodic System InspectionBuilt-InFiltration System 7.1 Introduction 7.2.1 Computer and Heating Problems ProblemProblem 7.2Troubleshooting7.2.3 Filtration Problems Corrective Action 7.2.4 Auto Top-OffProblems7.2.6 7.2.5 Bulk Oil System ProblemsError Log Codes Probable Causesis missing 8.1Wiring Diagrams 8.1.1Component Wiring Domestic CHAPTER 8: WIRING DIAGRAMS8.1.2Component Wiring CE 8.1.3Component Wiring CSA 8.1.4Component Wiring Australia 8.1.5Contactor Box – Delta Configuration 8.1.6 Contactor Box – WYE Configuration 8.1.7 BIELA14 Series GEN II LOV Simplified Wiring START OF 6-WIRE DATA & POWER8051734Q Page NOTE: Do NOT overfill the jug A.1.1 Bulk Oil SystemsFigure 2: Position the melter APPENDIX C: Solid Shortening Melter Use 1-800-551-8633 SERVICE HOTLINEFAX Parts FAX Tech Support
Related manuals
Manual 26 pages 13.97 Kb Manual 96 pages 23.21 Kb