The first two menu items: AUTO FILTER and MANTAINENCE (MANUAL) FILTER are covered in Chapter 5. The other menu items are covered on the following pages.
The DRAIN TO PAN and FILL VAT FROM DRAIN PAN functions are used primarily for diagnostic purposes. They are used when oil is to be drained to the pan or returned to the frypot.
4.11.2 Drain to Pan
The drain to pan function drains the oil from the frypot to the filter pan.
1.With the computer OFF, press and hold the filter button for three seconds, for the selected vat to drain.
The computer displays filter menu for three seconds, changing to MAINT Filter.
2. Use the t and ubuttons to scroll to drain to pan.
3. With drain to pan displayed, press the (1) to continue.
The computer displays drain to pan? alternating with yes no.
4. Press the (1 yes) to continue drain to pan.
The heating source is disabled and the system checks that the pan is in place. If no pan is detected, the computer displays INSERT PAN until the pan is detected.
With the pan detected, the drain valve opens. The computer displays draining for 20 seconds.
The computer displays vat empty? alternating with yes.
5. Press the (1 yes) button if the vat is empty to continue.
The computer displays FILL VAT FROM Drain pan? alternating with yes no with an audible alarm. To refill the vat continue to the next step, otherwise skip to step 8.
6. Press the (1 yes) button to refill the vat.
The computer displays FILLING. After filling the computer displays IS VAT FULL? alternating with yes NO.
If the vat is not full press the (2 NO) button to run the filter pump again.
7. | Press the | (1 yes) button if the vat is full to return to OFF. |
8. | Press the | (2 NO) button. |
The computer displays REMOVE PAN.