Frymaster BIELA14 warranty Disable

Page 32
DISABLE

17.With duty time 1 (shake time) entered, press the u (INFO) button to save duty time one and scroll to DUTY TIME 2. If a product calls for a second duty to be preformed, it can be entered here. Use the instructions above to enter duty time two, otherwise press the u (INFO) button to save the duty time and scroll to QUAL TMR (Quality Timer), which is used to set the hold time before the food is to be discarded.

18.With qual tmr displayed on the left and :00 displayed on the right use the number keys to enter the time in minutes and seconds for the product hold time (ex. 7:00 minutes as 700).

19.With QUAL TMR (hold time) entered, press the u (INFO) button to save the quality time and scroll to AIF

DISABLE

20.With AIF Disable displayed on the left and NO

displayed on the right use the 3and4 buttons to toggle between YES and NO. This feature, if set to yes, disables the AIF (auto intermittent filtration) for the programmed product. This is used to prevent co- mingling of product-specific oils.

21.If the AIF DISABLE selection is set to NO press the u (INFO) button to save the AIF disable selection and scroll to the ASSIGN BTN selection.

The computer displays ASSIGN BTN on the left and the chosen product on the right.

To assign the entered product to a button, follow instructions below.

22.With the chosen product displayed on the right, and ASSIGN BTN on the left, press a button between 1-0 to assign the product. The LED in the chosen product button will illuminate (see photo above). To unassign a product from a button, press the button assigned to that product. The LED no longer illuminates.

23.Once the button is assigned, press the u (INFO) button to save the

assigned button.

The computer displays name on the left with the product (ex. WINGS) on the right.

*Note: If additional programming, to add other products, is necessary press the (2) button once and then the u button and return to step 4.

4-14

Image 32
Contents OPERATOR’S MANUAL FRYMASTER BIELA14 SERIES GEN II LOVELECTRIC FRYER FOR YOUR SAFETYNOTICE NOTICE TO U.S. CUSTOMERSNOTICE TO OWNERS OF UNITS EQUIPPED WITH COMPUTERS CANADADANGER M3000 Menu Summary Tree Adding New Product Menu Items Product SelectionSee section 4.10.2A.WARRANTY PROVISIONS - FRYERS B.WARRANTY PROVISIONS - FRYPOTSD.WARRANTY EXCLUSIONS C.PARTS RETURNThis warranty also does not cover •overtime or holiday charges1.2Safety Information BIELA14 SERIES GEN II LOV ELECTRIC FRYERCHAPTER 1: INTRODUCTION 1.1General1.5Installation, Operating, and Service Personnel 1.3Computer Information for the M3000 Computers1.4European Community CE Specific Information CE Standard1.7Shipping Damage Claim Procedure What to do if your equipment arrives damaged1.8Service Information 2.1General Installation Requirements NOTICE2.1.2 Electrical Grounding Requirements 2.2Power Requirements 2.1.3 Australian RequirementsDANGER TYPICAL CONFIGURATION BIELA314 SHOWN CHAPTER 3: OPERATING INSTRUCTIONS3.1Equipment Setup and Shutdown Procedures M3000 COMPUTER3.3 Low Oil Volume Automatic Refill 3.3.2 Install the Oil Reservoir3.3.1 Prepare the System for Use 3.3.3 Routine Oil Changes3.3.4Bulk Oil Systems 4.1M3000 General Information FR FRIES4.2Basic Operation 4.3Cooking with Multi-ProductDisplay 4.4Cooking with Dedicated Display 4.5Changing from Breakfast Setup to Lunch <<<< >>>><<<<>>>>; an alarm will sound Press and quickly4.6Changing from Lunch Setup to Breakfast 4.7M3000 Button Description and Functions 4.7.1 Navigation Buttons4.7.2 Filter, Temperature and Info Buttons 4.7.3 Cook Channel and Selection Buttons4.8M3000 Menu Summary Tree See section4.10.2 4.10.34.9Fryer Setup Mode Programming 123424hR 4.10 M3000 Common Tasks 4.10.1 Escape Menu Itemsfull 1.Escaping out of a menu or sub-menuPROD selectionproduct COOK ID DISABLE 4.10.3 Storing Menu Items in Product Buttons Product selection prompt4.10.4.1 Disposal for Non-BulkOil Systems 4.10.4.2 Refilling JIB Oil Systems When finished, the computer displays REMOVE PAN 2. Press the u INFO button and scroll to dispose4. To dispose press the 1 yes button to continue The computer displays DRAINING4.11.1 Accessing the Filter Menu 4.11 Filter Menua. auto filter b. maint filter4.11.2 Drain to Pan 4.11.3 Fill Vat from Drain Pan yes no4.11.4 Fill Vat from Bulk 4.12 Programming Level One 4.11.5 Pan to Wastec. DEEP CLEAN MODE e. Fryer setupa.disabled b.enabled 4.12.1 AIF CLOCKYes No 4.12.2DEEP CLEAN MODE BOIL-OUTselection display EMPTY? and Yes NO DANGER 4.12.3 HIGH-LIMITTEST MODE 4.13 Programming Level Two compc. password SETUP 4.13.1 PRODUCT COMP MODEa. Prod comp b. e-log4.13.3 PASSWORD SETUP MODE 4.13.2 E-LOGMODE4.13.4 ALERT TONE MODE 4.13.5 FILTER AFTER 4.14 INFO Mode 4.13.6 FILTER TIMEFULL VAT CONFIGURATION SPLIT VAT CONFIGURATION4.14.1 FILTER STATS MODE a. filter stats4.14.2 REVIEW USAGE MODE a. DAY wed, DATE 03/20/07 – Current day and date4.14.3LAST LOAD MODE FULL / SPLIT VAT CONFIGURATION4321 5.Press the 2 button again to quit 4-38CHAPTER 5: FILTRATION INSTRUCTIONS 5.1IntroductionThe filter pad or paper MUST be replaced daily 5.2Preparing the Filter for Use5.3 Auto Intermittent Filtration AIF DRAINING, WASHING and FILLING during the process 5.3.1 Auto Demand Filtration2. Press the 9 1 yes button to continue 9.Press 9 1 yes to silence alarm and continue 5.4.4 Filter Error Flowchart prompt for SYSTEM ERRORThe filter pad or paper must be replaced daily 5.4.5 Filter Busy5.5Manual or End of Day Filtration MAINT FLTR 2.Press the uINFO button to scroll to maInT fIltEr 9. Press the 9 1 yes button to continue 6.1.3Clean Behind Fryers – Weekly 6.1Cleaning the Fryer DANGER6.1.2Clean the Built-inFiltration System – Daily Deep Clean Boiling Out the Frypot Replace the O-rings6.2Annual/Periodic System Inspection FryerBuilt-InFiltration System 7.1 Introduction Problem Problem7.2Troubleshooting 7.2.1 Computer and Heating Problems7.2.3 Filtration Problems 7.2.4 Auto Top-OffProblems Corrective Action7.2.5 Bulk Oil System Problems Error Log CodesProbable Causes 7.2.6is missing CHAPTER 8: WIRING DIAGRAMS 8.1Wiring Diagrams 8.1.1Component Wiring Domestic8.1.2Component Wiring CE 8.1.3Component Wiring CSA 8.1.4Component Wiring Australia 8.1.5Contactor Box – Delta Configuration 8.1.6 Contactor Box – WYE Configuration 8051734Q 8.1.7 BIELA14 Series GEN II LOV Simplified WiringSTART OF 6-WIRE DATA & POWER Page A.1.1 Bulk Oil Systems NOTE: Do NOT overfill the jugFigure 2: Position the melter APPENDIX C: Solid Shortening Melter Use SERVICE HOTLINE FAX PartsFAX Tech Support 1-800-551-8633
Related manuals
Manual 26 pages 13.97 Kb Manual 96 pages 23.21 Kb