Frymaster BIELA14 warranty Filter After

The computer displays volume 1-9on the left and 9 on the right.

3.Use the number keys to set volume level. Select from nine levels of volume with 1 being the softest and 9 the loudest.

4.Use the t and u buttons to scroll to tone 1-3.

The computer displays tone 1-3on the left and 1 on the right.

5.Use the number keys, to set the tone frequency from 1 to 3.

6.Press the (2) button to return to product level 2 program prompt.

7.Press the (2) button again to exit.

The computer displays OFF.

4.13.5 FILTER AFTER

The AIF filtration mode uses two measures before prompting to filter. One checks for cook cycles which is adjusted in this section and the other checks for time which is adjusted in the following section 4.13.6 FILTER TIME. The prompt for filtration is initiated by whichever occurs first; either the number of cycles elapsed or time elapsed.

The FILTER AFTER option is used to set the number of cooking cycles which occur before the filtration prompt is displayed.

1.Perform steps 1-3 on page 4-29 through 4-30. Scroll to FILTER AFTER.

2. With FILTER after displayed, press the (1 yes) button.

The computer displays filter after on the left and 0 or another number on the right.

3.Use the number keys from 0 to 9 to enter the number of cook cycles before prompting to filter (ex. after every 12 cycles enter as 12).

The computer displays filter AFTER on the left and 12 on the right.

4.Press the (2) button to return to product level 2 program prompt.

4-33