Frymaster BIELA14 warranty EMPTY? and Yes NO, Danger

Page 44
EMPTY? and Yes NO

*If the bulk oil system waste tank is full, the computer displays RTI TANK FULL alternating with CONFIRM. Press the (1) button and call the bulk oil waste provider. The display returns to OFF.

Manual background DANGER

When draining oil into a disposal unit, do not fill above the maximum fill line located on the container.

Manual background DANGER

Allow oil to cool to 100°F (38°C) before draining into an appropriate METAL container for disposal.

Manual background DANGER

When draining oil into an appropriate MSDU or METAL container, make sure the container will hold at least FOUR gallons (15 liters) or more. Otherwise oil could overflow and can cause injury.

5. Empty fry vat: Press the

(1 yes) button and skip to step 12.

Oil-filled Fry Vat: Press the

(2 no) button.

6.JIB Oil System: The computer displays is Disposal unit in place? alternating with yes no. Ensure an MSDU or suitable metal

container is in place under the drain with a capacity of FOUR gallons (15 liters) or larger is in place. Press the (1 yes) button to dispose the oil. The computer displays disposing ending with VAT EMPTY? alternating with YES. Press the (1 yes) button and skip to step 12.

Bulk* Oil System: Computer displays DRAINING. Once the oil has

drained into the filter pan the

computer displays Vat empty?

alternating with yes. Press the

(1 yes) button and continue.

*If INSERT PAN is displayed, remove and replace the filter pan.

Bulk Oil System: The computer displays OPEN DISPOSE VALVE.

7.Bulk Oil System: Open the left cabinet door and unlock the lock if necessary. Pull the dispose valve completely forward to start disposal.

Bulk Oil System: The computer displays DISPOSING for four minutes.

The pump transfers the waste oil from the pan to the bulk oil waste tanks.

Bulk Oil System: When finished, the computer displays REMOVE

PAN.

8. Bulk Oil System: Remove the filter pan and ensure the pan is empty. Bulk Oil System: The computer display alternates between IS PAN

EMPTY? and Yes NO

4-26

Image 44
Contents OPERATOR’S MANUAL FRYMASTER BIELA14 SERIES GEN II LOVELECTRIC FRYER FOR YOUR SAFETYNOTICE NOTICE TO U.S. CUSTOMERSNOTICE TO OWNERS OF UNITS EQUIPPED WITH COMPUTERS CANADADANGER M3000 Menu Summary Tree Adding New Product Menu Items Product SelectionSee section 4.10.2A.WARRANTY PROVISIONS - FRYERS B.WARRANTY PROVISIONS - FRYPOTSD.WARRANTY EXCLUSIONS C.PARTS RETURNThis warranty also does not cover •overtime or holiday charges1.2Safety Information BIELA14 SERIES GEN II LOV ELECTRIC FRYERCHAPTER 1: INTRODUCTION 1.1General1.5Installation, Operating, and Service Personnel 1.3Computer Information for the M3000 Computers1.4European Community CE Specific Information CE Standard1.7Shipping Damage Claim Procedure What to do if your equipment arrives damaged1.8Service Information 2.1General Installation Requirements NOTICE2.1.2 Electrical Grounding Requirements 2.2Power Requirements 2.1.3 Australian RequirementsDANGER TYPICAL CONFIGURATION BIELA314 SHOWN CHAPTER 3: OPERATING INSTRUCTIONS3.1Equipment Setup and Shutdown Procedures M3000 COMPUTER3.3 Low Oil Volume Automatic Refill 3.3.2 Install the Oil Reservoir3.3.1 Prepare the System for Use 3.3.3 Routine Oil Changes3.3.4Bulk Oil Systems 4.1M3000 General Information FR FRIES4.2Basic Operation 4.3Cooking with Multi-ProductDisplay 4.4Cooking with Dedicated Display 4.5Changing from Breakfast Setup to Lunch <<<< >>>><<<<>>>>; an alarm will sound Press and quickly4.6Changing from Lunch Setup to Breakfast 4.7M3000 Button Description and Functions 4.7.1 Navigation Buttons4.7.2 Filter, Temperature and Info Buttons 4.7.3 Cook Channel and Selection Buttons4.8M3000 Menu Summary Tree See section4.10.2 4.10.34.9Fryer Setup Mode Programming 123424hR 4.10 M3000 Common Tasks 4.10.1 Escape Menu Itemsfull 1.Escaping out of a menu or sub-menuPROD selectionproduct COOK ID DISABLE 4.10.3 Storing Menu Items in Product Buttons Product selection prompt4.10.4.1 Disposal for Non-BulkOil Systems 4.10.4.2 Refilling JIB Oil Systems When finished, the computer displays REMOVE PAN 2. Press the u INFO button and scroll to dispose4. To dispose press the 1 yes button to continue The computer displays DRAINING4.11.1 Accessing the Filter Menu 4.11 Filter Menua. auto filter b. maint filter4.11.2 Drain to Pan 4.11.3 Fill Vat from Drain Pan yes no4.11.4 Fill Vat from Bulk 4.12 Programming Level One 4.11.5 Pan to Wastec. DEEP CLEAN MODE e. Fryer setupa.disabled b.enabled 4.12.1 AIF CLOCKYes No 4.12.2DEEP CLEAN MODE BOIL-OUTselection display EMPTY? and Yes NO DANGER 4.12.3 HIGH-LIMITTEST MODE 4.13 Programming Level Two compc. password SETUP 4.13.1 PRODUCT COMP MODEa. Prod comp b. e-log4.13.3 PASSWORD SETUP MODE 4.13.2 E-LOGMODE4.13.4 ALERT TONE MODE 4.13.5 FILTER AFTER 4.14 INFO Mode 4.13.6 FILTER TIMEFULL VAT CONFIGURATION SPLIT VAT CONFIGURATION4.14.1 FILTER STATS MODE a. filter stats4.14.2 REVIEW USAGE MODE a. DAY wed, DATE 03/20/07 – Current day and date4.14.3LAST LOAD MODE FULL / SPLIT VAT CONFIGURATION4321 5.Press the 2 button again to quit 4-38CHAPTER 5: FILTRATION INSTRUCTIONS 5.1IntroductionThe filter pad or paper MUST be replaced daily 5.2Preparing the Filter for Use5.3 Auto Intermittent Filtration AIF DRAINING, WASHING and FILLING during the process 5.3.1 Auto Demand Filtration2. Press the 9 1 yes button to continue 9.Press 9 1 yes to silence alarm and continue 5.4.4 Filter Error Flowchart prompt for SYSTEM ERRORThe filter pad or paper must be replaced daily 5.4.5 Filter Busy5.5Manual or End of Day Filtration MAINT FLTR 2.Press the uINFO button to scroll to maInT fIltEr 9. Press the 9 1 yes button to continue 6.1.3Clean Behind Fryers – Weekly 6.1Cleaning the Fryer DANGER6.1.2Clean the Built-inFiltration System – Daily Deep Clean Boiling Out the Frypot Replace the O-rings6.2Annual/Periodic System Inspection FryerBuilt-InFiltration System 7.1 Introduction Problem Problem7.2Troubleshooting 7.2.1 Computer and Heating Problems7.2.3 Filtration Problems 7.2.4 Auto Top-OffProblems Corrective Action7.2.5 Bulk Oil System Problems Error Log CodesProbable Causes 7.2.6is missing CHAPTER 8: WIRING DIAGRAMS 8.1Wiring Diagrams 8.1.1Component Wiring Domestic8.1.2Component Wiring CE 8.1.3Component Wiring CSA 8.1.4Component Wiring Australia 8.1.5Contactor Box – Delta Configuration 8.1.6 Contactor Box – WYE Configuration 8051734Q 8.1.7 BIELA14 Series GEN II LOV Simplified WiringSTART OF 6-WIRE DATA & POWER Page A.1.1 Bulk Oil Systems NOTE: Do NOT overfill the jugFigure 2: Position the melter APPENDIX C: Solid Shortening Melter Use SERVICE HOTLINE FAX PartsFAX Tech Support 1-800-551-8633
Related manuals
Manual 26 pages 13.97 Kb Manual 96 pages 23.21 Kb