Frymaster BIELA14 warranty is missing

		is missing
E12	ERROR RETURN VALVE NOT OPEN	Return valve was trying to open and confirmation
		is missing
E13	ERROR RETURN VALVE NOT CLOSED	Return valve was trying to close and confirmation
		is missing
E14	ERROR AIF BOARD	MIB detects AIF missing; AIF board failure
E15	ERROR MIB BOARD	Cooking computer detects MIB connections lost;
		Check software version on each computer. If
		versions are missing, check CAN connections
		between each computer; MIB board failure
E16	ERROR AIF PROBE	AIF RTD reading out of range
E17	ERROR ATO PROBE	ATO RTD reading out of range
E18	Not used
E19	M3000 CAN TX FULL	Connection between computers lost. Check for
		loose CAN cables between computers and MIB
		board. Check software version by pressing the
		TEMP button with the computers displaying OFF.
		If a computer displays only M3000 software, the
		computer may be defective.
E20	INVALID CODE LOCATION	SD card removed during update
E21	FILTER PAD PROCEDURE ERROR	25 hour timer has expired or dirty filter logic has
	(Change Filter Pad)	activated
E22	OIL IN PAN ERROR	The MIB has reset the oil in pan flag.
E23	CLOGGED DRAIN (Gas)	Vat did not empty during filtration
E24	AIF BOARD OIB FAILED (Gas)	Oil is back sensor failed.
E25	RECOVERY FAULT	Recovery time exceeded maximum time limit.
E26	RECOVERY FAULT CALL SERVICE	Recovery time exceeded maximum time limit for
		two or more cycles.
E27	LOW TEMP ALARM	Oil temperature has dropped lower than 15°F
		(8°C) in idle mode or 45°F (25°C) in cook mode.

7-6