Jenn-Air JJW3430 manual To Set a Delay Start, Delay with Cook Timer, Delay for Clean

Delay Start

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

Delay Start allows the oven(s) to be set to turn on at a certain time of day.

Delay Start should not be used for food such as breads and cakes because they may not bake properly.

Delay Start is available with any cycle that has a Delay Start button.

To Set a Delay Start:

1.From any mode with the Delay Start button available, press DELAY START. (Delay Start is available on the Timer Not Set/ Cook Time screen or the temperature screen).

2.Set time of day you would like the oven to start heating by using the slider to enter a desired time or press the “-15min” or “+15min” buttons. These buttons decrease or increase the selected time and also move the slider.

3.Touch SET DELAY.

4.To change the previously set delay start time, touch START TIME, make necessary changes and touch DELAY.

Delay with Cook Timer:

1.If Delay with Cook Timer is desired, select Timer Not Set or Cook Timer.

2.Program desired cook time.

3.(Optional) Touch Delay Start. The difference between the start and end time should equal the cook time.

4.Optional) Select Keep Warm: ON to set Keep Warm to come on after the cook time expires.

5.Use the slider to enter a desired begin and end time or press the “-15min” or “+15min” buttons. These buttons decrease or increase the selected begin/end time and also move the slider.

6.Touch SET DELAY.

Delay with Probe:

WARNING

Burn Hazard

Use an oven mitt to remove temperature probe. Do not touch broil element.

Failure to follow these instructions can result in burns.

1.If Delay is chosen when the probe is in use, select Delay Start when at the Probe Temp screen, then select when cooking should begin. Because the probe controls the end time, the end time will not be displayed.

2.Use the slider to enter a desired begin time or press the “-15min” or “+15min” buttons. These buttons decrease or increase the selected begin and also move the slider.

3.The oven will automatically keep the food warm when the probe reaches the target temperature.

4.Touch SET DELAY.

Delay for Clean

1.If Delay for Clean is desired, select Delay Start after selecting the Cleaning level. Select when cleaning should begin. The oven will calculate the end time based on your cleaning level choice.

2.Use the slider to enter a desired begin and end time or press the “-15min” or “+15min” buttons. These buttons decrease or increase the selected begin/end time and also move the slider.

3.The oven will cool for an additional hour after cleaning is completed.

4.Touch SET DELAY.

31