Jenn-Air JMW3430 manual Electronic Oven Control, Control Panel, Display, Welcome Guide

ELECTRONIC OVEN CONTROL

This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and appearances of the items shown here may not match those of your model.

The oven's controls are accessed through its control panel and interactive touch display.

NOTE: Due to the sensitivity of the control panel, we have provided special instructions for cleaning the panel as well as the touch control panel. See “General Cleaning” section for cleaning instructions.

A B C D E F

A. Touch panel	D. Interactive touch display	G. Cancel oven
B. Microwave	E. Kitchen timer	H. Setup menu
C. Microwave light	F. Cancel microwave	I. Oven light
		J. Oven

Control Panel

The control panel houses the control menu and function controls. The control pads are very sensitive, and require only a light touch to activate.

For more information about the individual controls, see their respective sections in this manual.

Welcome Guide

This appears on the display the first time the oven is powered up. The Welcome Guide allows you to set up your new oven.

1.Select the language by touching English or Français.

2.Select temperature degree units by touching Fahrenheit or Celsius.

3.Select clock units by touching AM/PM or 24-HOUR (military).

4.Select YES or NO for Daylight Savings - Time Observed.

5.Touch NEXT.

6.Enter current clock time using the on-screen number keyboard.

7.Touch AM or PM and ANALOG or DIGITAL for clock style.

8.Touch NEXT.

9.Select today’s date by using the on-screen keyboard and use the buttons “<“ and “>” to enter the month and year.

10.Select NEXT.

11.Use the page up and page down arrows to select a screen appearance to match your oven.

12.Toggle between Orange and Blue to define your accent color.

13.Toggle between On and Off as options to show animation while cooking.

14.Select DONE. This will save your adjustments.

15.See “Setup Menu” section for more detailed information.

Display

When the oven (s) are in use (active mode), the display shows the clock, mode, oven temperature and timer, if set. If the timer is not set, you can set it from this screen.

After approximately 2 minutes of inactivity, the display will go into standby (sleep) mode and the backlight of the display will dim. When the oven is in operation, the display will remain active.

During programming, the display shows menus and the appropriate selections for the respective cooking function.

5