Maytag W10600814B manual Melt and Hold, Pan Detection, Performance Boost Function, Timer, Zone

Page 7

To Turn Off:

Simmer can be turned off in 3 different ways:

1.Use the power slider to set to a heat level.

OR

2.Touch the surface cooking area OFF keypad.

OR

3.Select a different cooking function.

Melt and Hold

The Melt and Hold function can be used with all surface cooking areas.

To Use

To Turn On:

1.Check that a surface cooking area has been selected.

2.Touch MELT AND HOLD. “A” will appear in the display, and the indicator light next to Melt will light.

The timer remains visible and can be set if desired.

To Turn Off:

Melt and Hold can be turned off in 3 different ways:

1.Use the power slider to set to a heat level.

OR

2.Touch the surface cooking area OFF keypad.

OR

3.Select a different cooking function.

Pan Detection

If the system cannot recognize the pan, or if the pan has been removed from the surface cooking area, the “replace pan” animation appears in the cooking area display as a reminder. See the following illustration.

If the pan is not placed within 30 seconds, the zone(s) will switch Off.

If a Timer is running when a pan is removed, the countdown will continue.

Performance Boost Function

This function allows you to increase the heat setting level above the maximum heat setting 9 for 10 minutes or less.

NOTES:

Performance Boost function is available on only 1 surface cooking area at a time within a zone. For example: Within Zone 1, Performance Boost may be used on surface cooking area A or B, but not on both. See the following illustration.

AB

Zone 1

Surface cooking areas A and B

Zone 2

Surface cooking areas C and D

CD

If you attempt to use Performance Boost on more than one surface cooking area in the same zone, “P” will briefly flash in the display, and the first surface cooking area selected for Performance Boost will automatically be set back to the highest available power setting. The last surface cooking area selected will be set to Performance Boost.

1.Check that a surface cooking area has been selected.

2.Touch BOOST. “P” will appear in the display.

3.Touch BOOST when finished. The “P” will no longer be visible in the display, and the Performance Boost function will no longer be active. The surface cooking area turns back to the highest available power level.

NOTE: The Performance Boost function may automatically deactivate to keep the internal electronic components of the cooktop from becoming too hot.

Timer

Use the cooking timer to set times up to 90 minutes. The timer is independent of any other control settings. A cooktop element must be active in order for the cooktop timer to be used.

To Use:

1.Touch the TIMER “up” or “down” pad. “01” appears in the timer display.

2.Touch the TIMER “up” pad to increase the time in 1-minute increments.

or

Touch the TIMER “down” pad to decrease the time in 1-minute increments.

3.The timer will start to count down after a few seconds.

To change the time, touch the TIMER “up” or “down” pad.

4.When the countdown is finished, “00” flashes and a tone will sound.

NOTE: When the power is restored after an outage, the timer will no longer be running.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Smoothtop Double Oven Induction Range Table DES Matières Table of ContentsAnti-Tip Bracket Range SafetyImportant Safety Instructions Induction Cooking Cooktop USECooktop Controls To Use Hot Surface IndicatorSetting Recommended USE Control LockPerformance Boost Function TimerMelt and Hold Pan DetectionCookware Ceramic GlassHome Canning Electronic Oven Controls Settings Aluminum Foil Oven Temperature ControlOven USE Control LockoutBakeware Baking Power PreheatMeat Thermometer Oven VentsTo Broil Using Cook Time To Broil Using Hi/Low Temperature SettingsBroiling Convection Baking Upper Oven Lower Oven Rack Cook Time Food Position SettingPosition Setting Convection Cooking Lower Oven OnlyConvection Broil Keep Warm FeatureConvection Roasting Timed/Delay Cooking Sabbath ModeTo Set a Cook Time Range Care Self-Cleaning CycleWhen the self-clean cycle ends To Self-CleanTo Delay Start Self-Clean When the Self-Cleaning cycle endsStainless Steel on some models General CleaningTo Replace Oven LightOven Door To RemoveTroubleshooting Oven cooking results not what expected Self-Cleaning cycle will not operateOperational cooktop sounds Canada Assistance or ServiceAccessories U.S.AThis limited warranty does not cover Maytag Electric Range Limited WarrantyFirst Year Limited Warranty Parts and Labor Items Excluded from WarrantyPage La bride antibasculement Sécurité DE LA CuisinièreConservez CES Instructions Pour les cuisinières avec programme d’autonettoyage Utilisation DE LA Table DE Cuisson Commandes de la table de CuissonCuisson par induction Indicateur de surface chaude Verrouillage des commandesRéglage Utilisation Recommandée UtilisationMinuterie Mijotage Fonction doptimisation du rendementFaire fondre et maintenir au chaud Détection dun platTrois signaux sonores Un seul signal sonoreVitrocéramique Signaux sonoresLes matériaux non ferromagnétiques incluent Ustensiles de cuissonMise en conserve à la maison Les matériaux ferromagnétiques incluentCommandes Électroniques DU Four Réglages Verrouillage des commandes Commande de la température du FourPapier d’aluminium Utilisation DU FourCuisson par convection Ustensiles de cuisson au fourCuisson sur plusieurs grilles Cuisson au four Power Preheat préchauffage puissantThermomètre à viande Évents du fourCuisson au gril Aliments LA Grille Réglage Cuisson par convection Four inférieur uniquementCuisson au four par convection Four Supérieur Four Inférieur Durée DE Position DERôtissage par convection Réglage de la cuisson au four par convectionCaractéristique Keep Warm Mode SabbatActivation du mode Sabbat une seule fois Activation du mode SabbatRéglage d’une durée de cuisson différée Désactivation du mode SabbatCuisson minutée/de mise en Marche différée Réglage d’une durée de cuissonPréparation de la table de cuisson Entretien DE LA CuisinièreProgramme d’autonettoyage Préparation du fourPour différer l’autonettoyage AutonettoyageLorsque le programme d’autonettoyage est terminé Nettoyage Général Lampe du four RemplacementPorte du four Dépose RéinstallationDépannage Sons liés au fonctionnement de la table de cuisson Le programme d’autonettoyage ne fonctionne pasAux États-Unis Assistance OU ServiceAccessoires Au CanadaArticles Exclus DE LA Garantie Garantie Limitée DE Cuisinière Électrique MaytagLa présente garantie limitée ne couvre pas W10600814B
Top Page Image Contents