HOW TO REMOVE RANGE FOR SERVICING
Follow these procedures to remove appliance for servicing:
1.Slide range forward to disengage range from the
2.Shut off gas supply to appliance.
3.Disconnect electrical supply to appliance, if equipped.
4.Disconnect gas supply tubing to appliance.
5.Reverse procedure to reinstall. If gas line has been disconnected, check for gas leaks after reconnection.
NOTE: A qualified servicer should disconnect and reconnect the gas supply.
The servicer MUST follow installation instructions provided with the gas appliance connector and the warning label attached to the connector.
6.To prevent range from accidentally tipping, range must be secured to the floor by sliding rear leveling leg into the
SERVICE-PARTS INFORMATION
When your range requires service or replacement parts, contact your dealer or authorized service agency. Please give the complete model and serial number of the range which is located on