Estate 2318600 warranty Connect to Refrigerator Style, Complete the Installation

Page 5
Connect to Refrigerator

Connect to Refrigerator

Style 1

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help prevent damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

A

B

C

D

A. Tube clamp

C. Compression nut

B. Copper tubing

D. Valve inlet

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove and discard the shipping tape and the black nylon plug from the gray, coiled water tubing on the rear of the refrigerator.

3.If the gray water tube supplied with the refrigerator is not long enough, a ¹⁄₄" x ¹⁄₄" (6.35 mm x 6.35 mm) coupling is needed in order to connect the water tubing to an existing household water line. Thread the provided nut onto the coupling on the end of the copper tubing.

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

A

B

C

D

E F G

A. Refrigerator water tubing

 

E. Ferrule (purchased)

B. Nut (provided)

 

 

F. Nut (purchased)

C. Bulb

 

 

 

G. Household water line

D. Coupling (purchased)

 

 

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Style 3

1.Unplug refrigerator or disconnect power.

2.Remove and discard the shipping tape and the black nylon plug from the gray, coiled water tubing on the rear of the refrigerator.

3.Thread the provided nut onto the water valve as shown.

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

A

B

A.Bulb

B.Nut (provided)

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Complete the Installation

Style 2WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Flush the water system. See the “Water and Ice Dispensers” section.

NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Assistance or Service Table of Contents / Índice / Table des matièresAccessories REFRIGERATOR USE & CARE GUIDEIMPORTANT SAFETY INSTRUCTIONS REFRIGERATOR SAFETYDANGER Proper Disposal of Your Old RefrigeratorUnpack the Refrigerator INSTALLATION INSTRUCTIONSLocation Requirements Electrical RequirementsConnect Water Supply Water Supply RequirementsWater Pressure Reverse Osmosis Water SupplyStyle Complete the InstallationConnect to Refrigerator Style REFRIGERATOR USE Using the ControlsConvertible Drawer Temperature Control Crisper Humidity ControlThe Ice Dispenser Ice Maker and Storage BinTo Dispense Ice The Dispenser LightREFRIGERATOR CARE CleaningWater Filtration System Changing the Light BulbsRefrigerator Operation TROUBLESHOOTINGThe refrigerator will not operate The motor seems to run too muchIce and Water Temperature and MoistureTemperature is too warm There is interior moisture buildupThe water dispenser will not operate properly WATER FILTER CERTIFICATIONSWater is leaking from the dispenser The dispenser water is not cool enoughBase Grille Water Filtration System PRODUCT DATA SHEETSONE YEAR LIMITED WARRANTY WHIRLPOOL CORPORATION MAJOR APPLIANCE WARRANTYITEMS WHIRLPOOL WILL NOT PAY FOR callPELIGRO ADVERTENCIA SEGURIDAD DEL REFRIGERADORAyuda o Servicio Técnico AccesoriosADVERTENCIA INSTRUCCIONES DE INSTALACIÓNCómo deshacerse adecuadamente de su refrigerador viejoRequisitos eléctricos Requisitos de ubicaciónRequisitos del suministro de agua Método de conexión a tierra recomendadoPresión del agua Conexión del suministro de aguaSuministro de agua de ósmosis inversa Conexión a la línea de aguaUso de los controles USO DE SU REFRIGERADOREstilo Cómo terminar la instalaciónControl de humedad del cajón para verduras Control de temperatura del cajón convertibleDespachadores de agua y hielo en algunos modelosLa luz del despachador Fábrica de hielo y depósitoEl cierre del despachador en algunos modelos Para encender y apagar la fábrica de hieloSistema de filtración de agua CUIDADO DE SU REFRIGERADORLimpieza Cómo cambiar los focosFuncionamiento del refrigerador SOLUCIÓN DE PROBLEMASEl refrigerador no funciona Parece que el motor funciona excesivamenteHielo y agua Temperatura y humedadLa temperatura está demasiado caliente Hay acumulación de humedad en el interiorHay fugas de agua del despachador El despachador de agua no funciona debidamenteModelo WF-L500/L500,Capacidad de 500 gal. 1893 L HOJA DE DATOS DEL PRODUCTOGARANTÍA DE LOS ELECTRODOMÉSTICOS PRINCIPALES DE WHIRLPOOL CORPORATIONAccessoires Assistance ou serviceSÉCURITÉ DU RÉFRIGÉRATEUR DANGER AVERTISSEMENTAVERTISSEMENT INSTRUCTIONS DINSTALLATIONDéballage du réfrigérateur IMPORTANTES INSTRUCTIONS DE SÉCURITÉSpécifications électriques Exigences demplacementSpécifications de l’alimentation en eau Méthode recommandée de mise à la terrePression de leau Raccordement de la canalisation deauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauUTILISATION DU RÉFRIGÉRATEUR Utilisation des commandesAchever l’installation E F GRéglage de lhumidité dans le bac à légumes Commande de température du tiroir convertibleDistributeurs d’eau et de glaçons sur certains modèlesPour retirer et réinstaller le bac à glaçons Machine à glaçons et bac dentreposageLa lampe du distributeur Mise en marche/arrêt de la machine à glaçonsENTRETIEN DU RÉFRIGÉRATEUR Remplacement des ampoules d’éclairageSystème de filtration de leau NettoyageFonctionnement du réfrigérateur DÉPANNAGELe réfrigérateur ne fonctionne pas Le moteur semble fonctionner excessivementGlaçons et eau Température et humiditéLa température est trop élevée Il existe une accumulation dhumidité à lintérieurLeau du distributeur nest pas assez froide De leau suinte du distributeurd’approvisionnement en eau FEUILLES DE DONNÉES SUR LE PRODUITDirectives d’application/Paramètres WHIRLPOOL NE PRENDRA PAS EN CHARGE GARANTIE DES GROS APPAREILS MÉNAGERSGARANTIE LIMITÉE DE UN AN 5/06 2006 Whirlpool CorporationAll rights reserved Printed in U.S.A
Top Page Image Contents