Rotel RCD-06 SE Stereo Compact Disc Player

	RCD-06 SE Stereo Compact Disc Player
8

Additional Features

These convenience features add extra functionality to the RCD-06 SE, including the ability to memorize a group of tracks to be played, to repeat a disc, program, or track over and over, to play the tracks on a disc in random order, to automatically play the ﬁirst 10 seconds of each track, and to select from several available time displays.

PROGRAM Button J

Remote Only

This button,labeled PROG, allows you to memorize as many as 20 tracks on the current disc for playback in a speciﬁic order.For example, you could instruct the RCD-06 SE to play track 5,followed by track 3, followed by track 8. To begin a program:

1.Insert a disc and press the OPEN/CLOSE button to close the drawer. The RCD-06 SE will read the contents of the disc.

2.Press the PROG button on the remote control.The PROGRAM indicator will light up in the Display, along with “P:00” indicating that the unit is waiting for the ﬁirst track to be memorized.

3.Enter the ﬁirst track number using the DIRECT ACCESS buttons. Your selection will be memorized automatically and the Display indicator will change to “P:01”, indicating that one track has been memorized. Continue entering the rest of your selections using the DIRECT ACCESS buttons. Note that there is no need to press the PROG button as each selection is memorized as it is entered.

Once you have memorized a play list,the RCD-06 SE remains in PROGRAM mode until you open the disc drawer or press the STOP button twice in succession.If you press the PLAY button, the memorized program will play instead of the entire disc, starting with the ﬁirst selection in the memorized list.

When a PROGRAM has been memorized,most functions that would normally affect the entire disc operate on just the memorized program. For example, the TRACK buttons advance to the next track in the memorized program, not the next track on the disc. Likewise, the REPEAT button (see below) continuously plays the memorized program, not the entire disc.

REVIEW Button I

This button is used to review the memorized tracks in PROGRAM mode. Press the button and the ﬁirst memorized track number will appear in order in the Display, ﬂashing for approximately five seconds. Pressing the REV button again while the track number is ﬂashing will continue the review sequence, showing the next memorized track.Continue pressing the REVIEW button to see the complete memorized track list.

If you do not press the REVIEW button while the track number is ﬂashing, the review process is terminated and the unit resumes whatever mode it was in before you started to review, except that the last reviewed track number will remain active and shown in the display.

Note that you may remove a selection from the play list during the review procedure using the CLEAR button, as described below.

CLEAR Button H

Remote Only

This button allows you to remove a track selection from the memorized program play list during the review procedure described above. Follow the review procedure until the desiredtrack number is ﬂashing. Then, instead of pressing the REVIEW button to continue, remove thedisplayed track by pressing the CLEAR button while the number is still ﬂashing. You may then continue the review procedure.

RANDOM Button D

Remote Only

This instructs the CD player to play tracks from the entire disc in random order. Once all of the selections have been played once, the disc will stop playing, unless the REPEAT Button (see below) has been engaged, in which case the random play will continue until the STOP button is pressed. When the RANDOM button is engaged, the word RANDOM appears in the Display.

REPEAT Button C

Remote Only

This button allows you to repeat the current track or the entire disc continuously until the feature is cancelled by disengaging the REPEAT button or pressing STOP. the REPEAT button steps sequentially through the available options. Press the button once and the RCD-06 SE will repeat just the current track, displaying the indicator REPEAT 1 in the Display. Press the button a second time and the RCD-06 SE will repeat the entire disc, displaying REPEAT ALL in the Display. Press the button a third time to cancel the REPEAT function.

As noted above,REPEAT can be used in conjunction with the RANDOM play feature.

Note: The REPEAT function is automatically cancelled when the disc drawer is opened.

SCAN Button E

Remote Only

This feature automatically plays the ﬁirst ten seconds of each track on the disc (or the memorized program). To activate the feature, press the SCAN button. The word INTRO appears in the Display. To stop scanning and resume normal operation at the current track, press the SCAN button again or press the PLAY button.

TIME Button G

Remote Only

Normally, the RCD-06 SE displays the elapsed time of the currently playing track. The TIME button allows you to step through two alternative time displays. Pressing the button once displays the time remaining in the current track, which counts down as the track continues playing. Pressing the button a second time displays the time remaining on the entire disc (or memorized program). Pressing the button a third time reverts to the standard elapsed time display. When the TIME feature is activated, the word REMAIN appears in the Display.