STARTING/CANCELING A FUNCTION
After setting a function, you must press START/ ENTER to start the function. If you do not press START/ENTER within 5 seconds of setting, "START?" will show on the
display as a reminder. If you do not press START/ENTER within 5 minutes of setting, the time of day will appear. You must reset the function and press START/ENTER.
OFF/CANCEL will cancel any function except the | I | |||
_ | Clock, Timer, or Oven/Cooktop | Lockouts. | _ | |
When you press OFF/CANCEL, | the display | i | ||
| will show | the time of day or, if the minute | i | |
timer | is also being | used, the time remaining. | I |
ULTRABAKE TM BAKING/ROASTING
Your oven is designed with the ULTRABAKE TM enhanced baking system to constantly monitor oven temperature. The bake burner will cycle, as needed, to maintain the desired temperature. This feature is automatically activated when the oven is in operation.
1, Place the STURDIGLIDE TM rack(s) where you
need them in the oven. For more information, see the "Positioning racks and pans" section, p. 9.
2.Press BAKE.
3.Set the temperature (optional).
Do this step if you want to set a temperature other than 350°F. Press TEMP (A) or (T) ped(s) to raise or lower the temperature in 5°F amounts. Use these pads until the desired temperature shows on the small display.
IMPORTANT: Do not try to light the oven burner
during a power failure. Never place food or cookware directly on the oven door or the oven bottom.
PRESS | YOU SEE |
PRESS | YOU SEE |
TEMP
(example for bake at 375°F)
m
15