Kenmore 665.75839 HOW the Cycle Works, Setting the Controls, Example shows light soil setting

HOW THE CYCLE WORKS

The SELECT CLEAN TM Serf-Cleaning cycle uses temperatures much hotter than normal oven use to break up and burn away soil and grease. SELECT CLEAN will set the clean time automatically, once you choose the soil level. You can choose SoilL (light soil), SoilA (average soil) or SoilH (heavy soil). SoilL will clean for approximately 2-2_ hours, SoilA for 3-3_ hours and SoilH for 4-4"_ hours.

The door must be closed completely for it to lock and the cycle to begin. If properly closed, the door will lock approximately 6 seconds after START/ENTER is pressed. The cycle time includes an approximate 30 minute cool down time. To see the time of day during the cycle, press CLOCK for 5 seconds.

SETTING THE CONTROLS

start Self-¢ ea it g i mediately; PRESS

1.Press SELECT CLEAN.

Press pad twice, SoilA (for average soil) will replace SoilL.

Press pad three times, SoilH (for heavy soil) will replace SoilA.

NOTE: You can scroll through all 3 settings (SoilL, SoilA and SoilH) continuously by pressing

SELECT CLEAN.

2. Press START/ENTER, PRESS

3.After the SELECT CLEAN Self-Cleaning cycle ends: LOCKED goes off and the door unlocks.

4.Press any pad or open the door to remove "End" and bring back time of day,

5.After the oven is cool wipe off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mild abrasive cleanser

or cleaning sponge.

YOUSEE

(example shows light soil setting)

YOU SEE

YOU SEE

YOU SEE

28