Walker MC19 manual Location Right Side, Behind Operator Seat Part Number

Safety Instructions

SAFETY, CONTROL, AND INSTRUCTION DECALS

Safety, Control, and Instruction Decals are installed on the machine;

if any are missing, illegible, or damaged, a replacement should be ordered and installed before putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.

1.

2.

8600-23

Location: Right Side, Behind Operator Seat

Part Number: 8600-23

1.Warning – entanglement hazard.

•Remove ignition key before raising front body.

2.Body Tilt Latch

•Raise lever to release.

•Lift at back of body to raise.

1.

Location: Catcher Door Hinge Bar,

LH and RH Sides

Part Number: 8600-10

1.Caution - Pinch point.

• Keep all body parts clear when closing grass catcher door.

Location: Bridge Assembly and

LH Gear Axle

Part Number: 5810-3

1. 2. 1.

2.

3.

4.

5.

Location: RH Fender

Part Number: 8600-33

1.Warning – read Operator’s Manual before servic- ing or performing maintenance.

•Engage parking brake.

•Remove ignition key.

2.Forward Speed Control

•Move lever forward to increase speed; back to stop.

3.Warning – do not operate the machine without a deck or other implement attached.

4.PTO Clutch Lever

•Move lever back to engage PTO clutch; for- ward to disengage.

5.Warning – do not engage PTO clutch with PTO shaft disconnected.

16