Shindaiwa 89307, LE2510/EVC manual Work Safely, Stay Alert, Safety Labels, Use Good Judgement

Page 3

Safety

Work Safely

This machine operates at very high speeds and has the potential to do seri- ous damage if misused, abused or mis- handled. To reduce the risk of injury, you must maintain control at all times, and observe all safety precautions dur- ing operation. Never permit a person without training or instruction to operate this machine!

WARNING!

Never operate power equipment of any

kind if you are tired or if you are under WKHLQÀXHQFHRIDOFRKROGUXJVPHGLFD- tion or any other substance that could affect your ability or judgement.

Stay Alert

You must be physically and mentally fit to operate this unit safely.

WARNING!

Never make unauthorized attachment installations. Do not use attachments not approved by Shindaiwa for use on this unit.

ALWAYS wear eye protection to shield against thrown objects.

NEVER run the engine when transport- ing the unit.

NEVER run the engine indoors! Make sure there is always good ventilation. Fumes from engine exhaust can cause serious injury or death.

ALWAYS use the proper cutting tool for the job.

WARNING!

Use Good Judgement

ALWAYS clear your work area of trash or hidden debris that could be thrown back at you or toward a bystander.

ALWAYS stop the engine immediately if it suddenly begins to vibrate or shake. Inspect for broken, missing or improperly installed parts or attachments.

ALWAYS keep the unit as clean as prac- tical. Keep it free of loose vegetation, mud, etc.

ALWAYSKROGWKHXQLW¿UPO\ZLWKERWK hands when cutting or trimming, and maintain control at all times.

ALWAYS keep the handles clean.

ALWAYS disconnect the spark plug wire before performing any maintenance work.

Safety Labels

This label indicates the minimum distance between front handle and rear grip.

READ THE

OPERATOR’S MANUAL

WEAR HEARING AND

ANSI Z87.1 APPROVED

EYE PROTECTION

50 FEET

(15m)

KEEP BYSTANDERS AWAY

AT LEAST 50 FEET (15m)

BEWARE OF THROWN OR

RICHOCHETED OBJECTS

KEEP AWAY FROM

ROTATING BLADE

Shindaiwa

P/N 19422-00046

IMPORTANT!

Safety and Operation Information Labels: Make sure all information labels are undamaged and readable. Imme- diately replace damaged or missing information labels. New labels are available. Contact your local authorized Shindaiwa dealer.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Part Number 89307 Rev /09 Lawn EdgerContents IntroductionOperational and warning labels Stay Alert SafetySafety Labels Work SafelyBe aware of the working environment Properly equipped operatorOperation Product DescriptionMounting the cutting attachment shield and edger blade AssemblyPrior to assembly Adjust Throttle Lever Free PlayMinimize the Risk of Fire Mixing fuelFilling the fuel tank Examples of 501 mixing quantitiesWhen the Engine Starts Starting the EngineDepress and hold the throttle lock button Checking Unit Condition Adjusting Engine IdleIdle Speed Adjustment Stopping the EngineOperation Using a hand-held edgerAdjusting blade cutting depth To adjust blade heightMaintenance filter only Assembly is damaged or missing Hour Maintenance10/15-Hour Maintenance Remove and clean or replace the spark plugInspect the Gearcase Protector Gearcase lubricationLubricate the Flexible Shaft D-shaped shim washer must beLong Term Storage 139/150-Hour MaintenanceValve Adjustment Maintenance after first 139-hoursReplacing the edger blade 0XIÁHU0DLQWHQDQFHRemedy Troubleshooting GuideEngine does not Start What To CheckEngine is knocking LOW PowerPossible Cause Is the engine overheating?What To Check Possible Cause Remedy Additional ProblemsEmission System Warranty Statement Remarques NOTAsOrilladora DE Grama Etiquetas información de operación IntroducciónContenido Declaraciones De SeguridadEtiquetas de seguridad SeguridadTrabaje con cuidado Mantengase AlertaSeguridad continuación El operario debidamente equipadoEsté alerta del area de trabajo Con seguridad Descripción de productoAjuste la holgura del acelerador EnsamblarAntes de ensamblar Instalación de la Caja de EngranajeDisminuya el riesgo de incendios Mezcla de CombustibleLlenando el Tanque de Combustible Ejemplos de cantidades de mezcla a proporción deAl arrancar el motor Arranque del motorPosición O motor Apagado Deslice el interruptor de ignición a laPara ajustar la altura de cuchilla OperaciónUtilizando el orillador de mano Ajuste de la cuchillaMantenimiento Mantenimiento continuación Mantenimiento cada 10 horasMantenimiento cada 50 horas Inspeccione el Protector de la Caja de Engranajes Mantenimiento cada 50 horas continuaciónLubrique la caja de engranajes Lubrique el Eje FlexibleMantenimiento Cada 139/150 Horas Ajuste de válvulasAlmacenamiento de Largo Plazo Mantenimiento de la silenciador Substituir la cuchillaRetire la malla y limpie con un cepillo de cerdas gruesas Posible causa Guía DiagnósticoEL Motor no Arranca Qué revisarEl motor golpea Baja Potencia¿Se sobrecalienta el motor? Limpiar, reparar o sustituir en caso necesarioGuía Diagnóstico continuación Que Está Cubierto Por Esta Garantía Esta garantía es administrada porSus Derechos y Obligaciones de Garantía Cobertura de la Garantía del FabricanteTualatin, Oregon 97062 USA 11, Ozuka-Nishi COUPE-BORDURE Table des matières Mises en gardeÉtiquettes au fonctionnement et à la sécurité Étiquettes de sécurité SécuritéSécurité au travail Demeurer vigilantSécurité suite Équipement complet de l’utilisateurTenir compte de l’environnement de travail Nomenclature Caractéristiques techniquesNe jamais effectuer des Réglage du jeu du levier d’accélération AssemblageAvant l’assemblage Pare-débris et lame du coupe-borduresRéduire les risques d’incendie Mélange de carburantRemplissage du réservoir à carburant Exemples de quantités de mélange de carburant àLorsque le moteur démarre Démarrage du moteurContrôle de l’état de l’appareil Démarrage du moteur suiteArrêt du moteur Réglage du ralenti du moteurAjustemnet de la hauteur de la lame UtilisationConsignes dutilisation du coupe-bordures Régler la profondeur de coupe de la lameEntretien Entretien toutes les 50 heures Entretien suiteEntretien toutes les 10 heures Entretien toutes les 10 15 heuresLubrifier l’boîtier d’engrenage Entretien toutes les 50 heures suiteToutes les 150 heures ultérieures Remisage à long termeRéglage du jeu des soupapes Entretien aux 139 heures, puisEntretien du pare-étincelles Remplacement de la lame du coupe-bordurePoints à contrôler SolutionGuide de dépannage LE Moteur NE Démarre PASLe moteur cogne Guide de dépannage suitePuissance Insuffisante Le moteur surchauffe-t-il ?Autres Problèmes Points à contrôler Cause probable SolutionCouverture de la garantie La présente garantie est administrée parVos droits et obligations en vertu de la garantie Couverture de la garantie des fabricants

LE2510/EVC, 89307 specifications

The Shindaiwa 89307 LE2510/EVC is a versatile and powerful tool, designed for both professional landscapers and dedicated homeowners seeking efficiency and reliability in their outdoor maintenance tasks. This innovative product stands out with its robust engine, ergonomic design, and advanced features.

At the heart of the LE2510/EVC lies its reliable engine, designed to deliver optimal performance while ensuring low emissions. This model utilizes Shindaiwa’s advanced technology to provide a perfect balance between power and fuel efficiency, allowing users to complete their tasks without frequent refueling interruptions. The engine is known for its durability, ensuring longevity even with heavy use in demanding conditions.

One of the standout features of the Shindaiwa LE2510/EVC is its lightweight design, which substantially reduces user fatigue during extended periods of operation. Comfort is enhanced through its ergonomic handle, which is designed for an optimal grip, allowing for precise control and maneuverability. This is particularly beneficial for users who may be using the tool for extended hours or performing intricate tasks that require attention to detail.

Another significant characteristic is its versatility. The LE2510/EVC comes with interchangeable attachments, promoting a multi-functional approach to yard maintenance. Users can switch between various tools, enabling them to tackle tasks such as pruning, hedging, or trimming, thereby making it a cost-effective solution for all landscaping needs.

Shindaiwa also incorporates advanced technologies aimed at increasing productivity. The LE2510/EVC is equipped with a high-efficiency air filter system designed to ensure the engine operates at peak performance. This not only extends the operational life of the tool but also minimizes maintenance. The easy-start technology reduces the effort needed to start the machine, which is a major advantage for users facing difficult starting conditions.

In conclusion, the Shindaiwa 89307 LE2510/EVC is a remarkable garden tool that combines power, efficiency, and user comfort. Its advanced technologies and features make it an ideal choice for anyone looking to enhance their landscaping workflow, ensuring tasks are completed effectively and with minimal fuss. Whether for professional landscaping businesses or dedicated gardening enthusiasts, this model represents an investment in quality and performance.
Top Page Image Contents