Shindaiwa DG250MI, DG150MI 2 1-Phase Output Terminals & Receptacles, 2.1 200, 2.2 400

Page 21

7.2.2 1-Phase Output Terminals & Receptacles

7.2.2.1 200 / 220V

The terminal Voltage: 100V/110V at 50Hz/60Hz only

In the case of no use of 3-Phase output power, refer to the following drawings and charts.

[DG150MI] (Max 3kVA)

[DG250MI] (Max 6kVA)





○ ○	less than					less than
less than	less than					less than
1.5kVA	1.5kVA						1.5kVA

less than 1.5kVA





○ ○	less than					less than
less than	less than					less than
3.0kVA	1.5kVA					1.5kVA

7.2.2.2 400 / 440V

The terminal Voltage: 100V/110V at 50Hz/60Hz only

In the case of no use of 3-Phase output power, refer to the following drawing and chart.

[DG150MI] (Max 1.2kVA)





○ ○	less than					less than
less than	less than					less than
0.6kVA	0.6kVA							0.6kVA
	less than					0.6kVA

[DG250MI] (Max 3kVA)





○ ○	less than					less than
less than	less than					less than
1.5kVA	1.5kVA						1.5kVA
	less than					1.5kVA

- 21 -

Image 21

Contents DG150MI DG250MI Table of ContentsIntroduction Suffocation from exhaust fume Safety GuidelinesElectrical Shock InjuriesInjuries to eyes and skin FireBurns Location of Warning labels Specification Matrix SpecificationsAlternator Engine Control Panel Unit Name of GeneratorParts Ambient ConditionExternal view Name Control panelWater Temperature Monitoring Lamp for temperature High EquipmentMonitor Display Engine Oil Monitoring Lamp for oil pressure low Battery Charge Monitoring Lamp charge lamp Fluid Level Monitoring Lamp DG250MI only GaugesTachometer DG250MI only Hour MeterOil Pressure Gauge DG250MI only Water Temperature Gauge DG250MI onlyGenerator Gauges LampSwitch Voltage Regulator and Throttle Handle Fuel Line Changeover Valve 3-way valveVoltage Regulator Throttle HandleUsing fuel from built-in fuel tank Transport and InstallationUsing fuel from external fuel tank TransportationTransportation InstallationConnection Selecting CableElectrical damages Connecting Cable Load Connection Terminal Plate 3-Phase / 1-phase 2 1-Phase Output Terminals & Receptacles 2.1 2002.2 400 Grounding Work Earth Leakage Relay and GroundingEarth leakage breaker relay has activated Operation CheckChecking Engine Oil Initialization and pre-checkElectrical Shock Injuries Fire BurnsViscosity and temperature Checking Coolant / WaterEngine Oil Capacity Checking Coolant reservoir tank / Adding coolant Checking Radiator / Adding waterCoolant Capacity Checking Fan BeltTension ConditionChecking Fuel Checking Battery Replacing the batteryChecking Fuel, Engine Oil, and Water leakage Initializing / preparation OperationPost startup check During OperationAdjustment During operation Stopping the Generator Protection⑥ FeaturesConnecting to External Fuel Tank Protection Feature ListOverload Turn the lever for 3-way valve to B position MaintenanceGenerator side Oil Change Oil Filter ChangeModel Isuzu Part No Cleaning / Changing Fuel Filter Cleaning / Changing Air Filter ElementDraining Water from Fuel Tank Changing Coolant / WaterModel Long-term Storage Storage ProceduresStacking TroubleshootingSymptoms Possible Cause Corrective Actions Generator Wiring Diagram Page Page Page Engine Wiring Diagram