Shindaiwa DG250MI Checking Coolant / Water, Engine Oil Capacity, Viscosity and temperature

Page 25

Viscosity and temperature

○

Temp

										SAE40
			SAE20 20W							SAE40

	SAE10W					SAE30

	-30			-15			0			15		25			30

						SAE10W - 30
						SAE15W - 40			20W - 40

8.1.3 Engine Oil Capacity

					(Unit : L)

			Lubrication Oil (including the oil in filter)
			DG150MI		7.4 (0.4)
			DG250MI		8.5 (0.4)	Value in ( ) shows the oil in filter
						＊
8.2 Checking Coolant / Water						＊
8.2 Checking Coolant / Water
✳	Also refer to the User’s Manual for Engine
✳	!		Danger

:Injuries

Before performing any equipment check or maintenance, stop the engine, and remove the engine key. A person performing the maintenance should always keep the key.

- 25 -

Image 25

Contents DG150MI DG250MI Table of ContentsIntroduction Suffocation from exhaust fume Safety GuidelinesElectrical Shock InjuriesFire Injuries to eyes and skinBurns Location of Warning labels Specification Matrix SpecificationsAlternator Engine Control Panel Unit Name of GeneratorAmbient Condition PartsExternal view Name Control panelEquipment Water Temperature Monitoring Lamp for temperature HighMonitor Display Engine Oil Monitoring Lamp for oil pressure low Battery Charge Monitoring Lamp charge lamp Fluid Level Monitoring Lamp DG250MI only GaugesTachometer DG250MI only Hour MeterOil Pressure Gauge DG250MI only Water Temperature Gauge DG250MI onlyGenerator Gauges LampSwitch Voltage Regulator and Throttle Handle Fuel Line Changeover Valve 3-way valveVoltage Regulator Throttle HandleUsing fuel from built-in fuel tank Transport and InstallationUsing fuel from external fuel tank TransportationTransportation InstallationSelecting Cable ConnectionElectrical damages Connecting Cable Load Connection Terminal Plate 3-Phase / 1-phase 2.1 200 2 1-Phase Output Terminals & Receptacles2.2 400 Grounding Work Earth Leakage Relay and GroundingEarth leakage breaker relay has activated Operation CheckChecking Engine Oil Initialization and pre-checkElectrical Shock Injuries Fire BurnsChecking Coolant / Water Viscosity and temperatureEngine Oil Capacity Checking Coolant reservoir tank / Adding coolant Checking Radiator / Adding waterCoolant Capacity Checking Fan BeltTension ConditionChecking Fuel Replacing the battery Checking BatteryChecking Fuel, Engine Oil, and Water leakage Initializing / preparation OperationPost startup check During OperationAdjustment During operation Stopping the Generator Protection⑥ FeaturesProtection Feature List Connecting to External Fuel TankOverload Turn the lever for 3-way valve to B position MaintenanceGenerator side Oil Filter Change Oil ChangeModel Isuzu Part No Cleaning / Changing Fuel Filter Cleaning / Changing Air Filter ElementChanging Coolant / Water Draining Water from Fuel TankModel Long-term Storage Storage ProceduresStacking TroubleshootingSymptoms Possible Cause Corrective Actions Generator Wiring Diagram Page Page Page Engine Wiring Diagram