Shindaiwa DG150MI, DG250MI Draining Water from Fuel Tank, Changing Coolant / Water, Model

- 38 -

	Reassemble it back
	※	The fuel strainer in DG150MI has the water separating feature as well.
		When the float (red) in the strainer comes up by 20mm from the bottom, drain the water
<Caution>
￿	Be sure to check for any contaminants on the O-ring,
	whenever reinstalling the cup
￿	Open the fuel line valve to OPEN after assembling, and
④	check for any leak
￿	When you replace the filter element, be sure to replace an
	O-ring as well

Model

DG150MI

DG250MI

ISUZU Part No.

8943602540

8970713480

10.5Draining Water from Fuel Tank

Drain water Every 200 hours

Unscrew the Fuel drain plug and turn the drain lever on the tank to OPEN

①	Reinstall the drain plug, after draining water fully and
②	restore the drain lever to CLOSE

<Caution>

Ensure always that the drain lever on the tank is kept CLOSE after draining water

10.6 Changing Coolant / Water

Replace Every 2 years or 400 hours

Remove the radiator cap

①	Loosen the water drain plug
②	After draining all the water, reinstall the water drain plug
③	Loosen the fastener that holds the reservoir tank, and drain
④	all the water

<Caution>

With respect to DG150MI, check and add water, after unscrewing the bolt holding the radiator cap cover