Shindaiwa DG250MI, DG150MI specifications Installation, Transportation

Page 17

6.1.2 Transportation

When transporting this equipment, make sure that the equipment is secured properly with ropes tied to the Side Rope Through.

<Caution>

Always use extreme care when loading, unloading, and transporting the equipment.

Failure to do so may result in damages and malfunction of the equipment.

6.2Installation

!Danger

:Suffocation from exhaust fume

￿ Exhaust fume from the engine contains many elements harmful to human. Do not operate this equipment in poorly ventilated area, such as inside a room or in a tunnel

! Caution

:Suffocation from exhaust fume

￿Do not point the exhaust fume toward pedestrians or building.

! Caution

:Fire

￿Always operate this equipment on flat surface and, at least 1 meter away from any objects (wall, box, etc.).

￿Temperature around muffler and exhaust can get extremely high. Keep any inflammable items (such as fuel, gas, paint, etc.) away from the equipment.

￿Always set the equipment on hard, flat surface.

￿Keep the equipment at least 1m from a wall or any obstacles, to allow workable space to access the control panel and opening of the panel door.

<Caution>

￿This equipment must be operated on hard and flat surface. Operating under any other conditions may result in malfunctions.

- 17 -

Image 17
Contents DG150MI DG250MI Table of ContentsIntroduction Suffocation from exhaust fume Safety GuidelinesElectrical Shock InjuriesBurns Injuries to eyes and skinFire Location of Warning labels Specification Matrix SpecificationsAlternator Engine Control Panel Unit Name of GeneratorExternal view PartsAmbient Condition Name Control panelMonitor Display Water Temperature Monitoring Lamp for temperature HighEquipment Engine Oil Monitoring Lamp for oil pressure low Battery Charge Monitoring Lamp charge lamp Fluid Level Monitoring Lamp DG250MI only GaugesTachometer DG250MI only Hour MeterOil Pressure Gauge DG250MI only Water Temperature Gauge DG250MI onlyGenerator Gauges LampSwitch Voltage Regulator and Throttle Handle Fuel Line Changeover Valve 3-way valveVoltage Regulator Throttle HandleUsing fuel from built-in fuel tank Transport and InstallationUsing fuel from external fuel tank TransportationTransportation InstallationElectrical damages ConnectionSelecting Cable Connecting Cable Load Connection Terminal Plate 3-Phase / 1-phase 2.2 400 2 1-Phase Output Terminals & Receptacles2.1 200 Grounding Work Earth Leakage Relay and GroundingEarth leakage breaker relay has activated Operation CheckChecking Engine Oil Initialization and pre-checkElectrical Shock Injuries Fire BurnsEngine Oil Capacity Viscosity and temperatureChecking Coolant / Water Checking Coolant reservoir tank / Adding coolant Checking Radiator / Adding waterCoolant Capacity Checking Fan BeltTension ConditionChecking Fuel Checking Fuel, Engine Oil, and Water leakage Checking BatteryReplacing the battery Initializing / preparation OperationPost startup check During OperationAdjustment During operation Stopping the Generator Protection⑥ FeaturesOverload Connecting to External Fuel TankProtection Feature List Turn the lever for 3-way valve to B position MaintenanceGenerator side Model Isuzu Part No Oil ChangeOil Filter Change Cleaning / Changing Fuel Filter Cleaning / Changing Air Filter ElementModel Draining Water from Fuel TankChanging Coolant / Water Long-term Storage Storage ProceduresStacking TroubleshootingSymptoms Possible Cause Corrective Actions Generator Wiring Diagram Page Page Page Engine Wiring Diagram