PRESENTATION PRO 18
Parking brake
The parking brake is applied as follows:
1. Push down the brake pedal (1).
2. Fully depress the lock button on the steering column (2).
3. Release the brake pedal while holding the button pressed.
The parking brake lock disengages automatically when the brake pedal is pressed.
Seat
The seat has a jointed attachment on the front edge and can be tipped forward.
The seat can also be adjusted lengthways.
To adjust move the lever under the front edge of the seat to the left, so that the seat can be moved forward or backwards to the required position.
The seat springing can be adjusted by moving the rubber stops in their mountings on the underside of the seat. Place both stops in the front, middle or rear position.
Fuelling
The engine runs on unleaded petrol with a minimum octane rating of 87 (not mixed with oil). We recommend the use of biodegradable alkylate petrol. Refer to the ”Technical data” for information on methanol and ethanol fuels.
Do not fill the tank completely, leave an expansion area of at least 2.5 cm (1").
WARNING!
Petrol is highly inflammable. Exercise care and refuel outdoors (see safety instructions).
Lights and power outlet
The lights are switched on and off using the power switch (1) on the control panel.
A seat heater or mobile phone charger are examples of articles that can be connected to the power socket (2). The power outlet is switched on and off using power switch (3) on the control panel.
1 |
2 |
3 |
English – 19 |