CONTENTS
Operator’s Manual for Rider Pro 15 and Pro 18
Introduction | 2 |
Driving and transport on public roads | 2 |
Towing | 2 |
Use | 2 |
Serial number | 3 |
Explanation of symbols | 4 |
Safety instructions | 5 |
General use | 5 |
Driving on slopes | 7 |
Children | 8 |
Maintenance | 8 |
Transport | 10 |
Presentation | 11 |
Speed limiter | 11 |
Cutting unit | 12 |
Location of the controls Pro 15 | 12 |
Location of the controls Pro 18 | 13 |
Presentation Pro 15 | 14 |
Throttle control | 14 |
Choke lever | 14 |
Chronometer | 14 |
Lift lever for cutting unit | 15 |
Lever for adjustment of cutting height | 15 |
Parking brake | 16 |
Seat | 16 |
Fuelling | 16 |
Presentation Pro 18 | 17 |
Throttle control | 17 |
Choke lever | 17 |
Chronometer | 17 |
Lift lever for cutting unit | 18 |
Lever for adjustment of cutting height | 18 |
Parking brake | 19 |
Seat | 19 |
Fuelling | 19 |
Driving | 20 |
Cutting tips | 20 |
Disengage lever | 20 |
Driving Pro 15 | 21 |
Before starting | 21 |
Starting the engine | 21 |
Driving the machine | 23 |
Stopping the engine | 24 |
Driving Pro 18 | 25 |
Before starting | 25 |
Starting the engine | 25 |
Driving the machine | 27 |
Stopping the engine | 28 |
Maintenance | 29 |
Maintenance schedule | 29 |
Removing of the machine hoods | 31 |
Checking and adjusting the steering wires .... | 33 |
Adjusting the parking brake | 34 |
Checking and adjustment of throttle wire | 34 |
Checking and adjusting the choke wire | 34 |
Replacement of fuel filter | 35 |
Checking the fuel pump’s air filter | 36 |
Muffler air intake Pro 18 | 36 |
Checking the transmission’s air intake | 36 |
Replacing the air filter Pro 15 | 37 |
Replacing the air filter Pro 18 | 38 |
Checking the engine’s cooling air intake | 39 |
Cleaning the engine and muffler | 39 |
Check the level of the battery acid | 40 |
Ignition system | 40 |
Check the safety system | 41 |
Replacing the light bulbs Pro 18 | 42 |
Fuses | 43 |
Checking the tyre pressure | 43 |
Fitting the cutting unit | 44 |
Installing BioClip 90 | 45 |
Removing the cutting unit | 45 |
Checking and adjustment of the cutting |
|
unit´s ground pressure | 46 |
Cutting height | 46 |
Checking the cutting unit´s parallelism | 47 |
Adjusting the parallelism of the cutting unit .... | 47 |
Replacing the cutting unit’s belts | 47 |
Service position for the cutting unit | 50 |
Placing in the service position | 50 |
Checking the blades | 53 |
Replacing the |
|
(BioClip, Combi 103) | 54 |
Removing the BioClip Plug (Combi) | 54 |
Lubrication | 55 |
Lubrication chart Pro 15 | 55 |
Lubrication chart Pro 18 | 56 |
General lubrication | 57 |
Lubricating wires | 57 |
Lubrication instructions according to chart | 57 |
Trouble shooting schedule | 65 |
Storage | 66 |
Winter storage | 66 |
Guard | 66 |
Service | 66 |
Wiring diagram Pro 15 | 67 |
Wiring diagram Pro 18 | 68 |
Technical data | 69 |
EU Declaration of Conformity | 71 |
Service Journal | 72 |
IMPORTANT INFORMATION
Read carefully through the Operator’s manual so that you know how to use and maintain the Rider before you use it.
For service measures other than those described in this manual, please contact an authorised dealer that provides parts and service.
English – 1