DRIVING
WARNING!
Never drive the machine on ground at an angle of more than 15°. Mow slopes upwards and downwards, never across. Avoid sudden changes in direction.
Cutting tips
•Localise and mark stones and other fixed objects to avoid collision.
•Start with a high cutting height and reduce down until the required mowing results are obtained.
•The mowing results are best with a high engine speed (fast rotating blades) and low driving speed (slow moving machine). If the grass is not too high and thick, the driving speed can be increased without noticeably depreciating the mowing result.
•The best lawns are achieved if the grass is cut often. Mowing becomes more uniform and the grass cuttings become more evenly distributed over the surface.
The total time consumption is not greater since it is possible to select a higher driving speed without inferior mowing results.
•Avoid mowing a wet lawn. The mowing results are inferior since the wheels sink down into the soft lawn.
•Hose down the cutting unit with water underneath each time it is used. Put the cutting unit in the service position first.
•If you use the BioClip unit it is important to mow the grass regularly.
•It is important to mow frequently when mowing with the mulching function.
MAX 15 |
WARNING!
Clear the lawn from stones and other objects which can be thrown out by the blades.
Mowing pattern
Release lever
The release control must be pulled out in order for the Rider to be moved when the engine is shutoff.
The diagram shows the release lever in the out position.
20 – English