Husqvarna Pro 18 manual Driving PRO, Before starting, Starting the engine

Page 22

DRIVING PRO 15

IMPORTANT INFORMATION

The air intake grille in the engine cover behind the driver’s seat must not be bloc- ked by, for example, clothing, leaves, grass or dirt.

Impaired cooling of the engine. Risk of major engine damage.

Before starting

•Read the safety instructions and the presenta- tion of the Rider before starting.

•Perform the daily maintenance before starting,

see ”Maintenance\Maintenance schedule”.

• Adjust the seat to the required position.

Starting the engine

1.Lift up the cutting unit by pulling the lever back- wards to locked position (transport position) and apply the parking brake.

2. Move the throttle control to the middle position.

English – 21

Image 22

Contents Rider Pro 15 Rider Pro Contents Driving and transport on public roads InstructionDear customer TowingGood service Safety InstructionsSerial number Explanation of Symbols Read the instructionsSafety instructions General useKeep children away from the area to be mowed Driving on slopes Proceed as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Presentation PresentationSpeed limiter Cutting unit Location of the controls ProPresentation Choke lever Presentation PROThrottle control ChronometerLever for adjustment of the cutting height Lift lever for cutting unitSeat Parking brakeFuelling Throttle control Lift lever for cutting unit Lights and power outlet Cutting tips DrivingRelease lever Before starting Driving PROStarting the engine Driving PRO Driving the machine Stopping the engine Before starting Driving PRO Driving the machine Stopping the engine Maintenance schedule MaintenanceYear Year 100 300 Front cover Removing of the machine hoodsEngine cover Pro Transmission coverRight-hand fender Pro Left-hand fender ProChecking and adjustment of the steering wires Checking and adjusting the choke wire Adjusting the parking brakeChecking and adjustment of the throttle wire Poorly adjusted brakes can result in reduced braking powerReplacement of the fuel filter Pro Muffler air intake Cleaning the pulse air filterChecking of the fuel pump’s air filter Check the transmission’s air intakeReplacing the air filter Pro Maintenance Cleaning the engine and muffler Checking the engine’s cooling air intakeProcedures on contact with acid Check the level of the battery acidFitting the wrong spark plug type can damage the engine Inspecting the safety system Replacing the light bulbs, Pro Fuses Checking the tyre pressureFitting the cutting unit Observe caution to avoid trapping your handInstalling BioClip Removing the cutting unitChecking and adjusting the cutting unit’s ground pressure Cutting HeightChecking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitBelt replacement on BioClip Replacing the cutting unit beltBelt change on Combi Maintenance Service position for the cutting unit Placing in service positionMaintenance Restoring from service position Checking the blades Replacing the break-pin BioClip 90, Combi Removal of BioClip plug CombiLubrication chart LubricationLubrication Lubricating wires GeneralPedal mechanism in frame tunnel Pro Triangular link and joints Chains in frame tunnelDriver’s seat Throttle and choke wires, lever bearings Belt tensionerEngine oil Gear lever Changing the engine oilTransmission oil level Parking brake wireTransmission Replacing the oil filter Hydraulic oil filter, changeTrouble Shooting Schedule Problem ProcedureWinter storage ServiceStorage CoverWiring Diagram PRO BL =BR = Technical Data Side ejector Rear ejector Cutting unit BioClipCombi EU-DECLARATION of Conformity EU declaration of conformity Only applies to EuropePre-delivery service ServicejournalWork done Hour service Servicejournal 100/200 hour service Servicejournal At least once a season Work done Date, mileage, stamp, sign Servicejournal ´z+H.6¶6*¨ Page 114 01 2003W07