Husqvarna Pro 18 manual Replacing the air filter Pro

Page 38

MAINTENANCE

Replacing the air filter Pro 15

If the engine seems to lack power or runs irregularly, the reason may be a clogged air filter.

It is therefore important to replace the air filter at regular intervals (see ”Maintenance schedule” for correct service interval).

WARNING!

Let the muffler system cool down before carrying out service work. Otherwise there is a risk of burns.

Clean/ replace the air filter as follows:

1.Remove the air cleaner case from the air cleaner body by pushing down the latches with fingers.

IMPORTANT INFORMATION

Never run the engine without the muffler fitted.

Do not use compressed air to clean the paper filter. Do not wash the paper filter.

The filters must not be oiled. They must be fitted dry.

2. Lift out the paper element and the foam element from the air cleaner case.

3. Clean the foam element by washing it in detergent and water.

4.Dry the foam element thorougly.

5.Clean the paper element by tapping gently to remove dust. If the element is very dirty, replace it with a new one.

Always replace the paper element every 200 hours.

6.Reinstall the foam element and the paper element into the air cleaner case.

7.Reinstall the air cleaner case into the air cleaner body by putting the hooks on the bottom of the air cleaner case into the air cleaner body

bottom.

English – 37

Image 38
Contents Rider Pro 15 Rider Pro Contents Driving and transport on public roads InstructionDear customer TowingSerial number Safety InstructionsGood service Explanation of Symbols Read the instructionsSafety instructions General useKeep children away from the area to be mowed Driving on slopes Proceed as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Speed limiter PresentationPresentation Cutting unit Location of the controls ProPresentation Choke lever Presentation PROThrottle control ChronometerLever for adjustment of the cutting height Lift lever for cutting unitFuelling Parking brakeSeat Throttle control Lift lever for cutting unit Lights and power outlet Release lever DrivingCutting tips Starting the engine Driving PROBefore starting Driving PRO Driving the machine Stopping the engine Before starting Driving PRO Driving the machine Stopping the engine Year MaintenanceMaintenance schedule Year 100 300 Front cover Removing of the machine hoodsEngine cover Pro Transmission coverRight-hand fender Pro Left-hand fender ProChecking and adjustment of the steering wires Checking and adjusting the choke wire Adjusting the parking brakeChecking and adjustment of the throttle wire Poorly adjusted brakes can result in reduced braking powerReplacement of the fuel filter Pro Muffler air intake Cleaning the pulse air filterChecking of the fuel pump’s air filter Check the transmission’s air intakeReplacing the air filter Pro Maintenance Cleaning the engine and muffler Checking the engine’s cooling air intakeFitting the wrong spark plug type can damage the engine Check the level of the battery acidProcedures on contact with acid Inspecting the safety system Replacing the light bulbs, Pro Fuses Checking the tyre pressureFitting the cutting unit Observe caution to avoid trapping your handInstalling BioClip Removing the cutting unitChecking and adjusting the cutting unit’s ground pressure Cutting HeightChecking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitBelt replacement on BioClip Replacing the cutting unit beltBelt change on Combi Maintenance Service position for the cutting unit Placing in service positionMaintenance Restoring from service position Checking the blades Replacing the break-pin BioClip 90, Combi Removal of BioClip plug CombiLubrication chart LubricationLubrication Lubricating wires GeneralPedal mechanism in frame tunnel Pro Driver’s seat Chains in frame tunnelTriangular link and joints Throttle and choke wires, lever bearings Belt tensionerEngine oil Gear lever Changing the engine oilTransmission Parking brake wireTransmission oil level Replacing the oil filter Hydraulic oil filter, changeTrouble Shooting Schedule Problem ProcedureWinter storage ServiceStorage CoverWiring Diagram PRO BL =BR = Technical Data Combi Cutting unit BioClipSide ejector Rear ejector EU-DECLARATION of Conformity EU declaration of conformity Only applies to EuropeWork done ServicejournalPre-delivery service Hour service Servicejournal 100/200 hour service Servicejournal At least once a season Work done Date, mileage, stamp, sign Servicejournal ´z+H.6¶6*¨ Page 114 01 2003W07