Husqvarna Pro 18 manual Hour service

Page 74

SERVICEJOURNAL

Work done

Date, mileage, stamp, sign

25 hour service

1.Clean the air filter pre-filter (foamed plastic filter). (more regularly in dusty conditions)

2.Clean the engine cooling air intake and transmission air intake.

3.Clean the fuel pump air filter. (in dusty conditions).

English – 73

Image 74

Contents Rider Pro 15 Rider Pro Contents Driving and transport on public roads InstructionDear customer TowingSerial number Safety InstructionsGood service Explanation of Symbols Read the instructionsSafety instructions General useKeep children away from the area to be mowed Driving on slopes Proceed as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Speed limiter PresentationPresentation Cutting unit Location of the controls ProPresentation Choke lever Presentation PROThrottle control ChronometerLever for adjustment of the cutting height Lift lever for cutting unitFuelling Parking brakeSeat Throttle control Lift lever for cutting unit Lights and power outlet Release lever DrivingCutting tips Starting the engine Driving PROBefore starting Driving PRO Driving the machine Stopping the engine Before starting Driving PRO Driving the machine Stopping the engine Year MaintenanceMaintenance schedule Year 100 300 Front cover Removing of the machine hoodsEngine cover Pro Transmission coverRight-hand fender Pro Left-hand fender ProChecking and adjustment of the steering wires Checking and adjusting the choke wire Adjusting the parking brakeChecking and adjustment of the throttle wire Poorly adjusted brakes can result in reduced braking powerReplacement of the fuel filter Pro Muffler air intake Cleaning the pulse air filterChecking of the fuel pump’s air filter Check the transmission’s air intakeReplacing the air filter Pro Maintenance Cleaning the engine and muffler Checking the engine’s cooling air intakeFitting the wrong spark plug type can damage the engine Check the level of the battery acidProcedures on contact with acid Inspecting the safety system Replacing the light bulbs, Pro Fuses Checking the tyre pressureFitting the cutting unit Observe caution to avoid trapping your handInstalling BioClip Removing the cutting unitChecking and adjusting the cutting unit’s ground pressure Cutting HeightChecking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitBelt replacement on BioClip Replacing the cutting unit beltBelt change on Combi Maintenance Service position for the cutting unit Placing in service positionMaintenance Restoring from service position Checking the blades Replacing the break-pin BioClip 90, Combi Removal of BioClip plug CombiLubrication chart LubricationLubrication Lubricating wires GeneralPedal mechanism in frame tunnel Pro Driver’s seat Chains in frame tunnelTriangular link and joints Throttle and choke wires, lever bearings Belt tensionerEngine oil Gear lever Changing the engine oilTransmission Parking brake wireTransmission oil level Replacing the oil filter Hydraulic oil filter, changeTrouble Shooting Schedule Problem ProcedureWinter storage ServiceStorage CoverWiring Diagram PRO BL =BR = Technical Data Combi Cutting unit BioClipSide ejector Rear ejector EU-DECLARATION of Conformity EU declaration of conformity Only applies to EuropeWork done ServicejournalPre-delivery service Hour service Servicejournal 100/200 hour service Servicejournal At least once a season Work done Date, mileage, stamp, sign Servicejournal ´z+H.6¶6*¨ Page 114 01 2003W07