Husqvarna Pro 18 manual Lift lever for cutting unit, Lever for adjustment of the cutting height

Page 16

PRESENTATION PRO 15

Lift lever for cutting unit

The lift lever is used to set the cutting unit in trans- port or mowing position.

1.Pull back the lever to the locked position for transport.

The cutting unit will lift up and the blades stop rotating.

2.Press in the lock button and move the lever forwards for the mowing position.

The unit will lower down and the blades start to rotate.

3.The lever can also be used to temporarily regulate the cutting height, e.g. for a small mound in the lawn.

Lifting of the cutting unit

Lowering of the cutting unit

Lever for adjustment of the cutting height

The cutting height can be adjusted to 9 different positions with the cutting height lever.

Rear and side ejector unit	40-90 mm
	(1 9/16" - 3 9/16")
BioClip and Combi unit	45-95 m
	(1 3/4" - 3 3/4")

English – 15

Image 16

Contents Rider Pro 15 Rider Pro Contents Instruction Dear customerDriving and transport on public roads TowingGood service Safety InstructionsSerial number Explanation of Symbols Read the instructionsSafety instructions General useKeep children away from the area to be mowed Driving on slopes Proceed as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Presentation PresentationSpeed limiter Cutting unit Location of the controls ProPresentation Presentation PRO Throttle controlChoke lever ChronometerLever for adjustment of the cutting height Lift lever for cutting unitSeat Parking brakeFuelling Throttle control Lift lever for cutting unit Lights and power outlet Cutting tips DrivingRelease lever Before starting Driving PROStarting the engine Driving PRO Driving the machine Stopping the engine Before starting Driving PRO Driving the machine Stopping the engine Maintenance schedule MaintenanceYear Year 100 300 Removing of the machine hoods Engine cover ProFront cover Transmission coverRight-hand fender Pro Left-hand fender ProChecking and adjustment of the steering wires Adjusting the parking brake Checking and adjustment of the throttle wireChecking and adjusting the choke wire Poorly adjusted brakes can result in reduced braking powerReplacement of the fuel filter Pro Cleaning the pulse air filter Checking of the fuel pump’s air filterMuffler air intake Check the transmission’s air intakeReplacing the air filter Pro Maintenance Cleaning the engine and muffler Checking the engine’s cooling air intakeProcedures on contact with acid Check the level of the battery acidFitting the wrong spark plug type can damage the engine Inspecting the safety system Replacing the light bulbs, Pro Fuses Checking the tyre pressureFitting the cutting unit Observe caution to avoid trapping your handInstalling BioClip Removing the cutting unitChecking and adjusting the cutting unit’s ground pressure Cutting HeightAdjusting the parallelism of the cutting unit Belt replacement on BioClipChecking the cutting unit’s parallelism Replacing the cutting unit beltBelt change on Combi Maintenance Service position for the cutting unit Placing in service positionMaintenance Restoring from service position Checking the blades Replacing the break-pin BioClip 90, Combi Removal of BioClip plug CombiLubrication chart LubricationLubrication Lubricating wires GeneralPedal mechanism in frame tunnel Pro Triangular link and joints Chains in frame tunnelDriver’s seat Throttle and choke wires, lever bearings Belt tensionerEngine oil Gear lever Changing the engine oilTransmission oil level Parking brake wireTransmission Replacing the oil filter Hydraulic oil filter, changeTrouble Shooting Schedule Problem ProcedureService StorageWinter storage CoverWiring Diagram PRO BL =BR = Technical Data Side ejector Rear ejector Cutting unit BioClipCombi EU-DECLARATION of Conformity EU declaration of conformity Only applies to EuropePre-delivery service ServicejournalWork done Hour service Servicejournal 100/200 hour service Servicejournal At least once a season Work done Date, mileage, stamp, sign Servicejournal ´z+H.6¶6*¨ Page 114 01 2003W07