Cisco Systems 10200 Learning the Measurement Types

6-2
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 6 Using BTS Measurements
Learning the Measurement Types
SIP_TOTAL_INCOMING_MSG
and
SIP_TOTAL_SUCCESS_INCOMING_MSG
Learning the Measurement Types
These tables list the different measurement types the BTS collects.
ISDN Measurements
Table 6-1 Using Measurements
Task Sample Command
Viewing measurement types show measurement-prov type=<type>;
Enabling measurements change measurement-prov type=<type>; enable=<yes>;
time-interval=<time interval>;
Disabling measurements change measurement-prov type=<type>; enable=<no>;
time-interval=<time interval>;
Changing measurement intervals change measurement-prov type=<type>; enable=<yes>;
time-interval=<5>;
Viewing measurement summaries report measurement-isdn-summary start-time=<start
time>; end-time=<end time>; call-agent-id=<CA ID>;
Note Results may take a few minutes to display.
Reporting historical measurements report measurement-sim-summary start-time=2003-03-27
10:00:00; end-time=2003-03-27 12:00:00;
call-agent-id=CA146; output=sim-report;
output-type=csv;
Create reports as either CSV or XML files. Then you can view or
transfer them using FTP/SFTP.
Note Results may take a few minutes to display.
Viewing in-progress measurements
from the data source
report measurement-isdn-summary call-agent-id=CA146;
output=isdn-partial-report; output-type=csv;
interval=current;
Note This is not supported for tg-usage measurements.
Note Results may take a few minutes to display.
Clearing in-progress
measurements from the data source
clear measurement-isdn-summary call-agent-id=CA146;
Caution This permanently erases in-progress measurements.
Table 6-2 ISDN Measurements
Measurement
Description
(* = rapid count could mean a potential problem in the system)
ISDN_ALERTING_RX ISDN ALERTING messages received.
ISDN_ALERTING_TX ISDN ALERTING messages sent from the reporting CA.