5-20
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 5 Managing External Resources
Learning External Resource Dependencies
Learning External Resource DependenciesEnsuring billing server
receives Call Detail Blocks
(CDBs)
1. On both the primary and secondary EMS enter:
CLI>show billing-acct-addr
2. Note the polling interval.
3. Log in to the billing server.
4. Ensure it receives billing files every XX minutes from the BTS,
where XX = polling interval.
Clearing billing directory
Caution Remove only transferred or secondary files. Never remove
primary files, you need these to collect revenue.
1. Check the default format secondary files:
<billing-file-prefix>-<call-agent-id>-(0/1){+/-}HHMMSS
-yyyymmdd-hhmmss-<sequence-number>-<S>
where S=secondary state
2. Check the PacketCable-specific format secondary files:
<billing-file-prefix>_yyyymmddhhmmss_<priority>_<1>_<c
ms-id>_<sequence-number>.ascii[.tmp]
where 1=secondary record-type
3. On the secondary EMS enter <hostname>#df –k
4. Ensure the /opt directory is not more than 70% full.
If the /opt directory is >70% full, remove obsolete scripting files
and other user-generated files. Also remove obsolete files from
the backup directory. For help call Cisco TAC.
Table 5-10 RGW and Subscriber Termination States
RGW State Allowed Subscriber Termination States
OOS • OOS
• UEQP
Table 5-9 Managing External Resources (continued)
Task Sample Command