recording
Rec(normal recording)
All video image from the channels never recorded will be recorded by pressing the REC button. At this time, the REC LED lights and the record icon appears on the screen. The HDD LED on the front panel blinks while data are saved on the HDD.
If the job (such as time change, file deletion, HDD format, or HDD connect/release) needing to stop recording is executed, the current recording job is halted.
Record schedule
The scheduled recording job will be automatically executed while the “Recording Schedule” function is selected from the recording schedule menu. If the recording schedule function is not set, recording will not be done during the time. The recording icon appears during the scheduled recording time. The HDD LED on the front panel blinks while data are saved on the HDD.
00 02 04 06 08 10 12 14 16 18 20 22 24
REC Option
Apply All | OK |
When an event occurs during the time that an event recording is set, the automatic recording function is performed. In this case, the event recording setup of the corresponding channel will be saved within the event recording mode setup
The event recording function is performed only if the event recording function is set from the recording schedule setup menu. If the job (such as time change, file deletion, HDD format, or HDD connect/release) needing to stop recording is executed, the current recording job is halted.
Event recording
Alarm DetectionThe Alarm In (sensor) operation mode has to be set to N.O (Normally Open) or N.C (Normally Close) from the alarm section of the event recording menu.
Motion DetectionThe motion detection region of the event recording menu has to be set.Event RecordIt sets the form saved when an event has occurred.If the job (such as time change, file deletion, HDD format, or HDD connect/release) needing to stop recording is executed, the current recording job is halted.