Record mode
The details of the record menu are as follows:Record Mode
Video Size | Quality | Frame |
CIF | Standard | 30 |
CIF | Standard | 30 |
CIF | Standard | 30 |
CIF | Standard | 5 |
| Auto Detection | |
| ON | 99 |
Default | OK | Cancel |
Set the recording mode values to be applied when pressing the REC button on the front panel.
Video SizeSet the screen size for recording.Video | Full D1 | Half D1 | CIF |
Source |
|
|
|
NTSC | 704 X 480 | 704 X 240 | 352 X 240 |
PAL | 704 X 576 | 704 X 288 | 352 X 288 |
Sets the number of frames for recording. The number of frames refers to the number of screens recorded per second.
Auto DetectionYou can select any of OFF and ON by pressing “OFF.” If “ON” is selected, the date for search is limited.
The date can be limited to 1 to 99 days. If “OFF” is selected, the cursor cannot be moved to the date selection area and the date for search is not limited. If you press “Default”, it returns the initial values.
Frame rate setting must be not until go over NTSC 90 fps, PAL 75 fps Frame rate by each channel of both Recording mode and Event Recording mode in Full D1 standards.
Event record
The details of the event recording are as follows:System | ► |
| ||
|
|
|
|
|
Camera | ► |
| ||
|
|
|
|
|
Monitoring | ► |
| ||
|
|
|
|
|
Record Mode |
|
|
|
|
|
|
|
|
|
Event Record | ► | Event Record Setup |
| |
|
|
| Alarm Detection Setup |
|
Record Schedule |
|
|
| |
|
|
| Motion Detection Setup |
|
Backup |
|
|
| |
|
| Video Loss Detection Setup |
| |
|
|
|
| |
Network | ► |
| ||
|
|
|
|
|
Move/Control |
|
| Select | Exit |
Event Record Setup
Event Record Setup
|
| Video Size | Quality | Frame |
|
|
| CIF | Standard | 30 |
|
|
| CIF | Standard | 30 |
|
|
|
| |||
|
| CIF | Standard | 30 |
|
|
| CIF | Standard | 5 |
|
|
| Pre Event | Post Event |
|
|
|
| 3 sec | 10 sec |
|
|
Default | OK | Cancel | |||
|
|
|
|
|
|
Video Size
Screen setup size displayed on record mode.Video | Full D1 | Half D1 | CIF |
Source |
|
|
|
NTSC | 704 X 480 | 704 X 240 | 352 X 240 |
PAL | 704 X 576 | 704 X 288 | 352 X 288 |
Quality
Sets the recording video quality for any event. Frame
Sets the number of frames for recording. The number of frames indicates the number of screens recorded per second.
Pre EventTime that an event has occurred
Record the