System Information & Setup
System Information/Setup
Mac Address | 00:C:8C:FF:00:A9 |
|
Software Version | V1.000A10 |
|
Package Search | Find package in USB |
|
Upgrade Version | None | Upgrade |
Remocon ID | 00 |
|
Micro Version | V1.0.0 |
|
| OK | Cancel |
|
|
|
|
|
|
Move/Control | Select | Exit |
Mac Address
Displays the unique number of the network hardware device attached to the system.
Software Version
Displays the current software version.
Package Search
After connecting the USB device (holding the DVR software) to a USB port, press the ( ) icon and the DVR software will be automatically searched. If the DVR software does not exist in the USB device, the upgrade version will not be displayed.
Upgrade Version
The software version to be upgraded will be shown. If you press the “Upgrade”, the restart message window appears. You can select “Yes” to proceed with the upgrade.
Remocon ID
In order to control the DVR with a remote commander, set the DVR and the remocon ID.
Micro Version
This menu indicates firm wear version of Microprocessor
| For the DVR to recognize the update file |
Caution | the file should be inserted into a folder |
named “update”. So this folder should | |
| be created on a USB memory and then |
| the upgrade file copied inside the folder. |
When upgrading the software, you must neither turn off the power nor remove the USB device. The system may run abnormally.
When using a USB memory, please use the USB device that can support Linux 2.6.0 or higher. The system cannot support the device that does not support Linux.
The file system for the USB device must be either FAT16 or FAT32. The system does not support NTFS or other file systems.
Since some USB devices either have no power supply or have a low voltage, a separate power supply may be needed to recognize them.
When shipping this product, the remote controller ID is set to ‘00’.
When changing the remote control ID, press “Remocon ID” and enter the DVR ID.
HDD Setup
HDD Setup
ATA |
| Info |
| Format | |||
1 |
| SATA2 |
| 160 GB / 232 GB |
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
HDD END |
| Setup |
|
|
|
|
|
Recording |
|
|
|
|
|
|
|
| Overwrite |
|
|
|
|
| |
|
| Off |
|
|
|
|
|
|
|
|
|
|
|
|
|
Format OK Cancel
HDD Info
Shows the installed HDD information and the capacity.
26_ menu setup
