MODEL | SIZE |
SONY | 512MB, 1GB, 2GB |
TRANSCEND | 128MB, 2GB, 4GB |
SAMSUNG | 1GB, 2GB |
AXXEN | 1GB |
SANDISK | 256MB |
Dadam | 640MB |
LG XTICK | 1GB |
AXIAN | 256MB |
Camera
Sets the camera channel for backup.
Format
It Supports
The backup file can be played on PC, but can not be played from a DVR.
In case of the AVI backup, you may need a DivX codec to play the saved file. You can obtain the DivX codec from the website www.divx.com.
A warning message appears if no backup device exists.
For a watermark, insert a mark that only the manufacturer knows into the video data lest a person should identify the mark with naked eyes. If the saved video data are forged or altered, "Tampered" will be displayed on the screen of the SDB Viewer or SFX Player.
If not, "Approved" will be displayed.
| Please do not remove the storage device |
Caution | during backup or do not turn off the |
system power. The system may run | |
| abnormally. |
| The system speed may be slowed down |
| during backup. |
| When backing up the data to CD, |
| the recorded data may be damaged |
| according to the conditions of disk |
| recording surface. |
Network
The details of the network menu are as follows:
SHR-6042/6040 MENU
System | ► |
|
|
|
|
|
|
Camera | ► |
|
|
|
|
|
|
Monitoring | ► | IP Setup |
|
|
| Web Viewer Port Setting |
|
Record Mode |
|
| |
|
| Network Status |
|
Event Record | ► |
| |
DDNS Setup |
| ||
|
|
| |
Record Schedule |
|
| |
| NTP Setup |
| |
Backup |
| Call Back Setup |
|
Network | ► | Transfer Picture Setup |
|
|
|
|
|
Move/Control |
| Select | Exit |
IP Setup
IP Setup
Connection Mode | NOT USE |
|
ID/Password | USER |
|
Site IP | 000.000.000.000 |
|
Subnet Mask | 255.255.255.000 |
|
Gateway | 000.000.000.000 |
|
Port (TCP) | 554 |
|
BandWidth | 10Mbps |
|
|
|
|
OK Cancel
Connection Mode
Sets the network type for the main system.
Press the Enter(
) button and select the network by using the or button.
NOT USE: Select it when you do not use a network.
ADSL(PPPoE): Select it when the main system is connected to the ADSL network using PPPoE.
ID/Password
You can manually enter the ID/PASSWORD when ADSL is selected.
When the main system is connected to the ADSL network, you need to enter the user ID and password provided by the ADSL carrier. The user ID and password may be entered by using the virtual keyboard.
05 menu setup
menu setup _35
