Samsung SHR-6040P, SHR-6042P Record mode, Event record, Event Record Setup, CIF, PAL, CIF, PAL, NTSC, NTSC, Video, Video, Source, Source, Full D1, Half D1,  Frame, Full D1, Half D1

Record mode

The details of the record menu are as follows:

Record Mode

Video Size	Quality	Frame
CIF	Standard	30
CIF	Standard	30
CIF	Standard	30
CIF	Standard	5
	Auto Detection
	ON	99
Default	OK	Cancel

Set the recording mode values to be applied when pressing the REC button on the front panel.

 Video SizeSet the screen size for recording.

Video	Full D1	Half D1	CIF
Source
NTSC	704 X 480	704 X 240	352 X 240
PAL	704 X 576	704 X 288	352 X 288

 QualitySets the recording video quality.Set to any of Very High, High, Standard and Low. Frame

Sets the number of frames for recording. The number of frames refers to the number of screens recorded per second.

 Auto Detection

You can select any of OFF and ON by pressing “OFF.” If “ON” is selected, the date for search is limited.

The date can be limited to 1 to 99 days. If “OFF” is selected, the cursor cannot be moved to the date selection area and the date for search is not limited. If you press “Default”, it returns the initial values.

Frame rate setting must be not until go over NTSC 90 fps, PAL 75 fps Frame rate by each channel of both Recording mode and Event Recording mode in Full D1 standards.

Event record

The details of the event recording are as follows:

SHR-6042/6040 MENU

System	►
Camera	►
Monitoring	►
Record Mode
Event Record	►	Event Record Setup
			Alarm Detection Setup
Record Schedule
			Motion Detection Setup
Backup
			Video Loss Detection Setup
Network	►
Move/Control			Select	Exit

Event Record Setup

Event Record Setup

	Video Size	Quality	Frame
	CIF	Standard	30
	CIF	Standard	30
	CIF	Standard	30
	CIF	Standard	5
	Pre Event	Post Event
	3 sec	10 sec
Default		OK	Cancel

Set the recording mode values to be applied when an event occurs.

 Video Size

Screen setup size displayed on record mode.

Video	Full D1	Half D1	CIF
Source
NTSC	704 X 480	704 X 240	352 X 240
PAL	704 X 576	704 X 288	352 X 288

 Quality

Sets the recording video quality for any event.

 Frame

Sets the number of frames for recording. The number of frames indicates the number of screens recorded per second.

 Pre Event

Pre-Event Section

Time that an event has occurred

Record the pre-conditions from the point that an event has occurred.3~5 Seconds: Set the recording time prior to the event occurrence.

setup menu 05

menu setup _31