Motion Detection Setup

Motion Detection Setup

Alarm-Out None

Duration

Sensitivity High

Area Set

Default

OK

Cancel

Set the motion detection area, sensitivity and alarm for each camera video.Press the Enter() button after moving the cursor on the camera to be set.

Alarm Out

It sets the alarm output when a motion is detected. Currently the system supports 2 Alarm Out functions and 1 built-in speaker output.

Duration

Sets the duration for Alarm Out. The alarm sound is sustained for the preset period.

CONTINUE: The alarm output sound will be maintained until it is cancelled by pressing the ALARM button manually on the front panel.

10~300 Seconds: Sets the duration for alarm output.SensitivityIt relates to configuration for motion detection and sensitivity.The sensitivity can be set to Very High, High, Medium, Low or Very Low.Area Set

If you press the Enter() button after moving the cursor to the video display area on the right, the motion area can be set/cancelled.

(): Sets the whole part as the motion area.(): Cancels the whole motion area.If you press “Default”, the motion setup is reset to the initial values.

Video Loss Detection Setup

Video Loss Detection Setup

Alarm-Out

Duration

 

None

10 SEC

 

None

10 SEC

 

None

10 SEC

 

None

10 SEC

 

 

OK

Cancel

Move/Control

Select

Exit

If a video loss occurs from each channel, it can be set to generate an alarm output sound.

Alarm Out

Sets an alarm-out method when an event has occurred from the Alarm In.

Currently, this system supports 2 Alarm Out functions and 1 built-in speaker (beep) output.

The following screen appears when you press theEnter() button after moving the cursor to the Alarm Out item.

1 2

Beep All

OK Cancel

Duration

Sets the duration for Alarm Out. The alarm sound is sustained for the preset period.

CONTINUE: The alarm output sound is maintained until it is cancelled by pressing the ALARM button manually on the front panel.

10~300 Seconds: Sets the duration for alarm output.

setup menu 05

menu setup _33