: Record Lock Icon

It indicates that the record lock is activated.

This icon appears when you are recording video images while the record lock is set. To cancel the recording, enter

the preset password.

: PTZ Icon

The channel that the PTZ function has been set shows the PTZ icon. It is changed to yellow when the PTZ function is now active.

: Audio Icon

This icon indicates the Audio On/Off state and if it is turned on, the icon is changed to yellow.

This icon does not appear when the Video or Audio is disabled.

: Alarm In Icon

It appears when an event from the Alarm In is detected.

: Motion Icon

It appears when a motion event occurs.

: Zoom Icon

The Zoom icon appears when Zoom In is active and disappears when inactive.

: Freeze Icon

It appears when the Freeze function is active and disappears when it is cancelled.

:Insufficient HDD Space Icon

It appears when the HDD writing space is not enough.

: locked Icon

It appears when the HDD is inferior goods.

: Screen Switching Icon

It appears when it is in the screen switching mode.

V.Loss / V.Off : Video Input Status

If no video inputs are detected even when the Video Setup is set to On, the [V.Loss] icon appears on the corresponding channel; and the channel that the Video Setup is set to Off shows the [V.Off] icon.

OSD Position Control Function

Caution It is possible to control OSD position of CH1, CH3 and CH4 on live screen by

Up/ Down/Left/Right buttons when in quad division mode.

Live screen modes

After taking 4 live video inputs, images are displayed in the following 3 modes.

CAM_01

CAM_02

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAM_03

CAM_04

 

 

 

 

CAM_01

CAM_02

 

 

 

 

 

 

 

 

 

 

 

 

 

 

< 4 Split >

 

 

 

< PIP >

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<Auto Sequence >

4 Split Mode:

It shows 4 video channels on the respective split screens.

PIP (Picture in Picture):

The 1/4-sized small screen appears on the full screen. The channels for both full and small screens can be arbitrarily selected.

The location of PIP screen can be set to any of 5 locations within the full screen by using the or button.

Auto Sequence Mode:

Multiple channels are sequentially displayed on the full screen at the preset interval.

live 04

live _17