Chapter 3: Web Interface
Fig.24 WebCAM Permit Hours Configuration
Click Configure to set the hours. Permit Hours (in 24hr format). without saving.
The Administrator can set up to 4 different Click Apply to save. Click Close to exit
Note:
The Reset button only revert the fields to initial values prior to any changes being made. If Apply has been clicked, it will not undo the changes.
ii.Block IP address
Fig.25 Blocking LAN IP address
Blocked IP List
This allows the Administrator to block specific LAN IP address from accessing WebCAM. Enter the IP address in dotted decimal notation and click Add Block IP. The blocked LAN IP address will be listed at the bottom.
Click Delete to remove it from the list.
WebCAM - user manual |
