Appendix A: Router Configuration
Proxim (http://www.proxim.com)
ORiNOCO
1.Log into your router using your router IP.
2.On the router’s main page, click on Setup at the top of the page.
3.On the left side of the page, click on Advanced settings
4.Check in the checkbox for Enable Port Forwarding.
5.Click New on the right side of the page.
6.Enter the following information on the page:
Global Port: | 80 |
Local Address: | Type in the camera’s IP address, for example: |
| 192.168.0.5 |
Local Port: | 80 |
Type: | TCP |
7.Click Save to save the settings.
8.Click New on the right side of the page.
9.Enter the following information on the page.
Global Port: | 9001 |
Local Address: | Type in the camera’s IP address, for example: |
| 192.168.0.5 |
Local Port: | 9001 |
Type: | UDP |
10.Click Save to save the settings.
11.Click Restart on the left side of the page to restart your router. WebCAM should now be configured to work with your router and be accessible from the internet.
WebCAM - user manual |
