Chapter 2: Hardware Setup
Chapter 2: Hardware Installation
The following details the hardware installation procedure for WebCAM IP camera.
Step 1:
Connect the PC camera into the USB port of WebCAM.
Step 2:
Connect the WebCAM to LAN by using the Ethernet UTP port.
Step 3:
Connect DC power adapter output into WebCAM socket, and plug the DC power input into the wall socket
Step 4:
Wait a moment and the LCD will display the IP Address, Subnet and Gateway. Use a Browser to log into WebCAM Web Interface
The 
icon on the LCD shows that a USB camera is connected.
The LCD display shows that two USB cameras are attached to the WebCAM.
WebCAM - user manual |
