Chapter 5: Using the Utility Program
No Devise
Password set.
If the Devise Password is enabled, the IP Address will be hidden.
Once set, Utility will request for the Device Password when you try to click on either, Setup Wizard, Launch WebCAM or IP Configuration button.
To remove the password,
a.Select the WebCAM unit from the Utility list.
b.Click IP Configuration.
c.Enter the unit’s Device Password
d. | Go to Advanced Device Password and delete both the entries. |
e. | Click OK to confirm. |
NOTE:
If the password is lost, you must use the Master Password to reset the Password field
ii.Management Protocol
This setting allows the administrator to determine the LAN HTTP access (web) to WebCAM IP camera. To limit access, the administrator can choose to use either the default open port 80 or other ports (between 1 to 65534).
Once the HTTP port number is set to another port (other than 80), the full LAN IP address must be entered in order to access the WebCAM web interface.
WebCAM - user manual |
