Manuals / Network Technologies / Computer Equipment / Network Card

Network Technologies CAT5 The Host Adapter, Installation of a PS/2 CPU, green-mouse, HA-PS2

Models: CAT5

1 42

Download 42 pages 26.76 Kb

Page 8

INSTALLATION

INSTALLATION

The Host Adapter

The PRIMUX HA Host Adapter is designed to support PS/2, SUN, and USB CPUs. For PS/2 CPUs use HA-PS2, for SUN CPUs use HA-SUN, and for USB CPUs use HA-USB. Before installing or removing a Host Adapter, power down the CPU to be connected/disconnected and disconnect the power cord from the CPU.

CAUTION! DAMAGE MAY OCCUR TO THE CPU AND HOST ADAPTER IF POWER IS NOT DISCONNECTED BEFORE CONNECTING OR DISCONNECTING CABLES.

Installation of a PS/2 CPU

Plug the cables of the HA-PS2 Host Adapter into the back of the CPU after disconnecting the power cord from the CPU. (See Fig. 2.)

a) Connect the purple 6 pin miniDIN cable end with the keyboard symbol on it to the keyboard port on the back of the CPU.

PS/2 Keyboard

b) Connect the green 6 pin miniDIN cable end with the mouse symbol on it to the mouse port on the back of the CPU.

PS/2 Mouse

c)Connect the blue 15HD cable end to the VGA port on the back of the CPU.

6miniDIN maleconnectors

6pinminiDIN femaleconnectors

purple-keyboard

green-mouse

HA-PS2

(FrontView)

	15HDfemale	15HDmale
	videoconnector	15HDmale
	videoconnector	videoconnector
		videoconnector
		RearViewofPS/2CPU

Figure 2- Connect a HA-PS2 Host Adapter to a PS/2 CPU

4

Image 8

Network Technologies CAT5 The Host Adapter, Installation of a PS/2 CPU, green-mouse, HA-PS2, FrontView, 15HDfemale

Contents

Host Adapter sold separately Man024 Rev 4/21/06R NETWORK INCORPORATEDTRADEMARK COPYRIGHTCHANGES Man024 Rev 4/21/06TABLE OF CONTENTS TABLE OF FIGURES INTRODUCTION MaterialsSupported Operating Systems Materials Supplied with this kitRearViewofPRIMUX-UZRUserStation FEATURES AND FUNCTIONSFrontViewofPRIMUX-UZRUserStation Figure 1- Typical Application PREPARATION FOR INSTALLATIONDefinitions INSTALLATION Installation of a PS/2 CPU6miniDIN maleconnectors 6pinminiDIN femaleconnectors purple-keyboard videoconnectorInstallation of a USB CPU Installation of a SUN CPUFigure 3- Connect a HA-USB Host Adapter to a USB CPU Figure 4- Connect a HA-SUN Host Adapter to a SUN CPUConnecting the CAT5 cable to the Host Adapter Installation with PS/2 devicesThe User Station RearViewFigure 7- Connect extended USB components to the User Station Installation with USB devicesFigure 6- Connect the Extended PS/2 components to the User Station Connecting the CAT5 cable to the User Station Power Up for the first timeRJ45male CAT5connector CAT5cable toMatrixSwitch FYI The Host Adapter is powered by the CPUDaisy-Chained Host Adapters Adding a Host Adapter to a segmenttoUserStation LastHostUSING THE PRIMUX CAT5 KVM SWITCH User Rights vs. Administrator RightsAdministrator Rights Include Hot PluggingChange the Default Administrator Password Administrator Login and PasswordSetup Host Adapters To change the administrator passwordPress F10 to return directly to the Command Mode menu Standards of OperationKeypad Control SecurityUser Access Functions Administrator LoginAutologin User LoginCommands for submenus CPU PowerFigure 13- Command Mode main menu Enter Administration Mode Administrator only- see pageScan Mode Normal ModeFunction KeystrokeSettings Menu Figure 14- Settings menuSettings Menu DescriptionFind Host Adapter Host Adapter Info screenFigure 15- Find Host Adapter screen Value or ActionOSD Settings Menu Figure 17- Help Pages for Command ModeFigure 18- OSD Settings Menu Help PagesOSD Settings Menu Host Adapters for ScanFigure 19- Host Adapters for Scan list FunctionVideo Quality Adjustment Figure 21- Video Adjustment ScreenChange Scan Dwell Time Figure 20- Scan Dwell Time screenAdministration Administration MenuFigure 22- Administration Menu FunctionEdit Hosts, Users, and User Station Info Host Adapter ListFigure 23- Edit Menu Figure 24- Host Adapter ListEdit Host Adapter Figure 25- Edit Host Adapters menuConfirmation Parameter ValueUser List Figure 26- User ListFunction DescriptionUser Info Edit UserFigure 27- User Info screen Figure 28- Edit User menuAdd New User Figure 29- Submenus of the Edit User menuFunction KeystrokeEdit User Password Host Access ListFigure 30- User Password screen Figure 31- Allow/Deny Access to Hosts screenChange Administrators Password Figure 32- Administrator Password screenEdit User Station Figure 33- Edit User Station screenUse with care, all user configuration settings will be lostSelect Autologon User Figure 34- Select user for AutologonIdle Timeout Figure 36- Idle Timeout screenUser Station Info screen Figure 35- User Station Info screenAlternate OSD Key Figure 37- Alternate OSD screenFunction KeystrokeUpdate Firmware/Bootloader Menu Figure 38- Update/Bootloader MenuA serial terminal must be connected to the RS232 serial port of the User Station to continue operationConfigure MAC Host Adapters Acquire/Send DDC InfoFigure 39- Select MAC Host Adapters screen FunctionSelect Keyboard Language Figure 40- Select Keyboard Language menuTECHNICAL SPECIFICATIONS INTERCONNECTION CABLE WIRING METHODDistances and Resolutions for CAT5/CAT5e and CAT6 Cables RESOLUTIONMale Connector Female ConnectorSignal NULL MODEM CABLE PINOUTSSAFETY AND EMC REGULATORY STATEMENTS MENU QUICK-FIND KEYSTROKE TABLESource Page Keystroke SequenceWARRANTY INFORMATION Man024 Rev 4/21/06