OSD Settings Menu |
|
|
Function | Description | Keystroke |
Move OSD Window Down | Moves the OSD window down on the monitor | D or |
Move OSD Window Up | Moves the OSD window up on the monitor | U or |
Move OSD Window Right | Moves the OSD window to the right on the monitor | R or |
Move OSD Window Left | Moves the OSD window to the left on the monitor | L or |
Make OSD Window Taller | Makes the OSD window taller on the monitor | T |
Make OSD Window Shorter | Makes the OSD window shorter on the monitor | S |
Reset OSD Window | Resets the OSD to the default size and position | W |
Esc | Exit the OSD Settings menu. Any changes are | X or Esc |
| automatically saved. | |
|
|
Host Adapters for Scan
From the Settings Menu, press <S> for the list of Host Adapters to select for scanning. (From Command Mode press <T> - <S>)
Figure 19- Host Adapters for Scan list
Scan Mode enables the user to scan through selected ports and to have full device control of the connected port. From this menu the user can edit the list of ports that can be scanned.
Only the selected ports will be scanned in Scan Mode when the respective user is logged in. Each user can have their own scan list (except for the "ROOT" user).
A check list with all the Host Adapter index numbers and names followed by a
•unchecked box = the corresponding Host Adapter is not in the scan list
• checked box = the corresponding Host Adapter is in the scan list
The user can toggle the state of the selected check box by pressing <Spacebar>, <Enter> or clicking the Host Adapter with the mouse.
Function | Description | Keystroke | |
|
|
| |
All | Select all Host Adapters | A | |
|
|
| |
None | Clear all selected Host Adapters | N | |
|
| ||
|
|
| |
Find | Find a Host Adapter using name, comments, unique ID, or index number | F | |
|
|
| |
Search | Locate a Host Adapter by name | R | |
|
|
|
19
