Upgrading VCX Server Software from 7.0 to 7.1 103

bIn the menu that appears, click Transfer Upgrade Images, and then Transfer IPMS Upgrade File.

In the Job Progress area of the window, progress messages appear in the Task Name and Task Status columns. The icon on the left initially appears yellow. After a few seconds, the icon turns green and the Task Status column shows that the file transfer was successful.

8Install the upgrade software on the VCX server.

aRight-click the server name (3Com VCX IP Telephony Server<hostname>) in the left pane of the EMS client window.

You must wait for a few seconds for the menu to appear.

bIn the menu that appears, click Install Upgrade Images, and then Install IPMS Upgrade.

In the Job Progress area of the window, progress messages appear in the Task Name and Task Status columns. The icon on the left initially appears yellow. After a few seconds, the icon turns green and the Task Status column shows that the upgrade was successful.

Installing SIP Phone This section describes how to install SIP Phone Downloader and Boot File Downloader and software patch release files. These instructions are specifically for a patch

Boot File Software release, not a system upgrade.

Patch Releases

There are two possible phone-only software upgrades: Application Downloader software (PhoneApp) and Boot software (PhoneBoot). Depending on the VCX system configuration, the procedures are performed on one of these servers:

■IP Telephony and Messaging server (All in One server)

■IP Telephony server (Soft Switch server)

■Call Processing server (Call server)

PhoneApp Upgrade

Follow the procedures in this section to upgrade the PhoneApp software.

1The software patch release upgrade file MUST be located in the <EMS_INSTALL_DIR>/software_upgrades/voice/PhoneAppUpgrades directory on the EMS server.

2Once the file is in the correct directory, from the EMS client explorer tree, click 3Com IP Telephony Server <hostname>.

3Click the Planned Upgrades tab in the right pane.