30CHAPTER 1: 3COM VCX IP TELEPHONY SERVER

Reserving and The Operator Reserve command reserves either the XML accounting or Unreserving the the VCX data servers so that no one else can perform operations on the Back-end Server server except the administrator. The Operator Unreserve command

cancels the reservation.

Reserving Back-end Servers

To reserve the back-end server using EMS:

1In the explorer tree, right-click the individual back-end server.

2From the pop-up menu, click Operator Reserve to reserve the back-end server.

If the back-end server is reserved, check the State tab to see who has reserved the card.

Unreserving Back-end Servers

To unreserve either the XML accounting or the VCX data servers:

1In the explorer tree, right-click the back-end server.

2From the pop-up menu, click Operator Un-reserveto unreserve the back-end server.

Updating the Server Use the State command to update EMS with the current operational State state, usage state, or administration state of the back-end server.

To update the state of either the XML accounting or the VCX data servers:

1In the explorer tree, right-click the back-end server.

2From the pop-up menu, select State and then click Update.