
Creating Backup Configuration Files | 19 |
Creating Backup EMS allows you to save the configurations for the IP Telephony Server Configuration Files and IP Messaging server and create backup configuration files. Use these
files to restore the IP Telephony Server and IP Messaging Server to a previous set of configurations.
Backup files contain configuration and backup information for all of the installed applications, as well as server and operating system configuration information. User profiles, voice mails, and database schemas are not backed up.
In addition to creating backup configuration files and performing restores,
EMS allows you to recover from a situation where an attempted restore fails.
Creating a Backup You can save the IP Telephony Server configuration to a backup file. After File you have saved the configuration, you can set the backup file as a
baseline so that you can restore it later.
To save the IP Telephony Server configuration:
1From the Explorer tab,
2From the
The progress is shown in the Job Progress section of the EMS GUI. When the command is finished, the Working icon changes to a Finished icon.
3Click Close.
This file becomes the current, or most recently saved or restored, version. You can set the current version as the baseline version.
Setting the Current | To set the current, or most recently saved or restored, configuration as |
Configuration as | the baseline version: |
Baseline |
|
1From the Explorer tab,
2From the
The progress is shown in the Job Progress section of the EMS GUI. When the command is finished, the Working icon changes to a Finished icon.
3Click Close.
This file becomes the baseline version.
To restore the IP Telephony Server configuration, refer to Restoring Backup Configuration Files.